Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Ricoh D041 MPC2550 DI-C1 — Trang 17/23

Code: 793

Description: Front jogger motor error with side tray (D038/D041)
The machine does not detect a correct signal from the front jogger fence HP sensor at power-on. The 1st detection failure issues a jam error, and the 2nd failure issues this SC code.
Causes: • Defective front jogger motor • Loosen connection • Motor overload • Defective front jogger fence HP sensor
Remedy: 1. Replace the front jogger fence HP sensor. 2. Replace the front jogger motor.

Code: 794

Description: Rear jogger motor error with side tray (D038/D041)
The machine does not detect a correct signal from the rear jogger fence HP sensor at power-on. The 1st detection failure issues a jam error, and the 2nd failure issues this SC code.
Causes: • Defective rear jogger motor • Loosen connection • Motor overload • Defective rear jogger fence HP sensor
Remedy: 1. Replace the rear jogger fence HP sensor. 2. Replace the rear jogger motor.

Code: 795

Description: Pick-up roller contact motor error with side tray (D038/D041)
The machine does not detect a correct signal from the pick-up roller HP sensor at power-on. The 1st detection failure issues a jam error, and the 2nd failure issues this SC code.
Causes: • Defective pick-up roller contact motor • Loosen connection • Motor overload • Defective pick-up roller HP sensor
Remedy: 1. Replace the pick-up contact motor. 2. Replace the pick-up roller HP sensor.

Code: 796

Description: Belt roller solenoid error
Causes: • Disconnected harness • Defective belt roller position sensor • Defective belt roller solenoid
Remedy: 1. Check the harness connection. 2. Replace the belt roller position sensor. 3. Replace the belt roller solenoid.

Code: 797

Description: NVRAM data error
Causes: • Defective NVRAM on the main board of the internal finisher
Remedy: 1. Check the harness connection. 2. Replace the main board.

Code: 798

Description: Front Fan error
The machine detects the fan lock signal (ON) consecutively 200 ms.
Causes: • Front fan damaged • Disconnect or defective the harness • Front fan overload
Remedy: 1. Check or replace the harness. 2. Replace the front fan.

Code: 799

Description: Output tray motor error
Causes: • Output tray motor damaged • Output tray motor overload • Loose connection of the output tray motor • Defective output tray motor
Remedy: Replace the output tray unit.

Code: 816

Description: Energy saving I/O sub-system error
The energy saving I/O sub-system detects an error.
Causes: • Controller board defective
Remedy: Replace the controller board.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie