Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Ricoh D046 MPW5100 Be-C1 — Trang 12/15

Code: SC860

Description: HDD startup error at main power on GW HDD is connected but a driver error is detected. The driver does not respond with the status of the HDD within 30 s.
Causes: • HDD is not initialized • Level data is corrupted • HDD is defective
Remedy:

Code: SC861

Description: HDD re-try failure GW At power on with the HDD detected, power supply to the HDD is interrupted, after the HDD is awakened from the sleep mode, the HDD is not ready within 30 s.
Causes: • Harness between HDD and board disconnected, defective • HDD power connector disconnected • HDD defective • Controller board defective
Remedy:

Code: SC863

Description: HDD data read failure GW The data written to the HDD cannot be read normally, due to bad sectors generated during operation.
Causes: • HDD defective
Remedy: If the bad sectors are generated at the image partition, the bad sector information is written to NVRAM, and the next time the HDD is accessed, these bad sectors will not be accessed for read/write operation.

Code: SC864

Description: HDD data CRC error GW During HDD operation, the HDD cannot respond to an CRC error query. Data transfer did not execute normally while data was being written to the HDD.
Causes: • HDD defective
Remedy:

Code: SC865

Description: HDD access error GW HDD responded to an error during operation for a condition other than those for SC863, 864.
Causes: • HDD defective.
Remedy:

Code: SC866

Description: SD card error 1: Recognition error GW The SD card mounted in the slot contains illegal program data.
Causes: • Use only SD cards that contain the correct data.
Remedy:

Code: SC867

Description: SD card error 2: SD card removed
Causes: The SD card in the boot slot when the machine was turned on was removed while the machine was on.
Remedy: • Insert the SD card, then turn the machine off and on.

Code: SC868

Description: SD card error 3: SC card access GW An error occurred while an SD card was used.
Causes: • SD card not inserted correctly • SD card defective • Controller board defective
Remedy: If you want to try to reformat the SC card, use SD Formatter Ver 1.1.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie