Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Ricoh D063 MP7001 MT-C4

Code: 101

Description: Exposure Lamp Error
At trigger on, the lamp was not detected on.
Causes: • SBU board defective • SIOB board defective • IPU board defective • BCU board defective • Exposure lamp defective • Lamp stabilizer defective • Lamp stabilizer harness damaged, disconnected • Standard white plate dirty, disconnected or has condensation • DF white belt dirty • DF glass dirty or has condensation • Scanner mirror dirty, out of position or has condensation • Lens dirty, out of position
Remedy:

Code: 120

Description: Scanner home position error 1
The scanner HP sensor does not detect the OFF condition during initialization or copying.
Causes: • BCU, SIOB defective • Scanner motor defective • Scanner HP sensor defective. • Harness between BCU, SIOB, scanner motor disconnected. • Harness between scanner HP sensor and BCU disconnected. • Scanner wire, timing belt, pulley, or carriage installed incorrectly.
Remedy:

Code: 121

Description: Scanner home position error 2
The scanner HP sensor does not detect the ON condition during initialization or copying.
Causes: • BCU, SIOB defective • Scanner motor defective • Scanner HP sensor defective • Harness between BCU, SIOB, scanner motor disconnected • Harness between scanner HP sensor and BCU disconnected • Scanner wire, timing belt, pulley or carriage installed incorrectly.
Remedy:

Code: 141

Description: Black level detection error
The black level cannot be adjusted within the target during auto gain control.
Causes: • Harness between SBU – SIOB is disconnected. • Harness between SIOB – BCU is disconnected. • Defective SBU • Defective BCU
Remedy: 1. Check the SBU-SIOB/SIOB-BCU harness connections or replace these harnesses. 2. Replace the SBU. 3. Replace the BCU

Code: 142

Description: White level detection error
The white level cannot be adjusted to the second target level within the target during auto gain control.
Causes: • Dirty exposure lamp or optics section • SBU board defective • SIOB defective • IPU board defective • BCU board defective • Harnesses are disconnected. • Exposure lamp defective • Lamp stabilizer defective • Scanner motor defective
Remedy: 1. Clean the exposure glass, white plate, mirrors, and lens. 2. Check if the exposure lamp is lit during initialization. 3. Check the harness connection. 4. Replace the exposure lamp. 5. Replace the scanner motor. 6. Replace the SBU board, SIOB, IPU board or BCU board.

Code: 143

Description: SBU auto gain error
The white level cannot be adjusted to the first target level within the target during auto gain control.
Causes: • SBU board defective • SIOB board defective • IPU board defective • BCU board defective • Scanner motor defective • Exposure lamp defective • Exposure lamp stabilizer defective • Harness between exposure lamp and lamp stabilizer is disconnected • Harness between lamp stabilizer – SIOB is disconnected • Harness between SBU - SIOB is disconnected • Harness between SIOB - BCU is disconnected • Harness between SBU – IPU is disconnected • Harness between IPU - BCU is disconnected • White plate is installed incorrectly or is dirty • Scanning mirrors of the exposure unit are dirty or out of position
Remedy:

Code: 144

Description: SBU transmission error
After the SBU switches on, the BCU detects one of the following conditions on the SBU: • 1 s after power on, the SYDO signal does not go high, even after 1 retry. • 1 s after power on, the SYDO signal goes high, but the SBU ID could not be read after 3 attempts.
Causes: • SBU defective • SIOB defective • BCU defective • Harness between the SBU - SIOB is disconnected • Harness between the SIOB - BCU is disconnected • Harness between the SIOB – PSU is disconnected
Remedy:

Code: 161-001

Description: IPU error
The error result of self-diagnostic by the ASIC on the BICU is detected.
Causes: • Defective BICU • Defective connection between BICU and SBU
Remedy: 1. Check the connection between BICU and SBU. 2. Replace the BICU.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie