Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Ricoh D082 MPC7501 V-C3

Code: 792-14

Description: 50/100 clamp adjustment error
Not detected at HP after the time prescribed to arrive at the HP had elapsed (more than 400 ms) (1st detection, jam, 2nd detection, SC error) -or- Detected at HP after the time prescribed to leave the HP had elapsed (more than 400 ms) (1st detection, jam, 2nd detection, SC error)
Causes: • 50/100 adjustment motor (M702) connector loose, broken, defective • Motor overload • Motor defective • Ring switch HP sensor (S706) connector loose, broken, defective, or sensor defective • Ring switch timing sensor (S707) connector loose, broken, defective, or sensor defective

Code: 792-19

Description: Output belt unit rotation error
Detected at HP after the time prescribed to leave the HP had elapsed (more than 800 pulses) (1st detection, jam, 2nd detection, SC error) -or- Not detected at HP after the time prescribed to arrive at the HP had elapsed (more than 2300 pulses) (1st detection, jam, 2nd detection, SC error)
Causes: • Output belt rotation motor (M403) connector loose, broken, defective • Motor overload • Motor defective • Output belt rotation HP sensor (S403) connector loose, broken, defective • Sensor defective

Code: SC101

Description: Exposure lamp error
The white level peak did not reach the prescribed threshold when the white plate was scanned.
Causes: • Dirty optics • Dirty white plate • Exposure lamp defective • Exposure lamp does not turn on • Lamp stabilizer defective • High voltage line leak • SIB defective • SBU defective

Code: SC120

Description: Scanner home position error 1
The scanner home position sensor did not detect the home position (did not go OFF) after the scanner moved forward 20 mm..
Causes: • Scanner motor defective • Scanner HP sensor defective • Harness between scanner motor and SIOB disconnected or broken. • SIOB defective

Code: SC121

Description: Scanner home position error 2
The scanner home position sensor did not go ON after the scanner moved forward 6 mm and the feeler entered the HP sensor.
Causes: • Scanner motor harness loose, broken, defective • Scanner motor defective • Scanner HP sensor disconnected, defective • SIOB defective

Code: SC141

Description: Black level detection error
During AGC the value for black level was not within ±3 of the prescribed value.
Causes: • SBU defective • Harness defective • Check harnesses between SBU and IPU • IPU defective • VBCU defective

Code: SC142

Description: White level detection error
During AGC the value for white level was not within -7 of the prescribed value.
Causes: • Exposure lamp defective • Harness disconnected, damaged • Dirty exposure glass, optics • Scanner motor, drive assembly defective • SBU board defective

Code: SC144

Description: SBU communication error
When the machine is switched on, or when the machine returns to full operation from the energy save mode, the machine can not access the SBU register, or the SBU register values are abnormal. Note: The ASIC IDs read during automatic adjustment of the SBU can be displayed with SP4600.
Causes: • SBU harness loose, disconnected, defective • SBU board defective • VBCU defective
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie