Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Ricoh D097 Aficio Pro C720S AGL-C1 — Trang 18/85

Code: 422

Description: Potential sensor error: Vd Adjustment M. The drum potential sensor detects 150V or more on the drum (Vd) for 0.7 msec. when the high voltage charge is supplied to the drum for the initial sampling before exposure.
Causes: • Drum potential sensor harness, connector is loose, broken, defective • Drum potential sensor dirty • Drum potential sensor defective • Drum connector, harness loose, broken, defective • Drum worn
Remedy: 1. Clean or replace the drum potential sensor. 2. Replace the drum unit.

Code: 423

Description: Potential sensor error: Vd Adjustment Y. The drum potential sensor detects 150V or more on the drum (Vd) for 0.7 msec. when the high voltage charge is supplied to the drum for the initial sampling before exposure.
Causes: • Drum potential sensor harness, connector is loose, broken, defective • Drum potential sensor dirty • Drum potential sensor defective • Drum connector, harness loose, broken, defective • Drum worn
Remedy: 1. Clean or replace the drum potential sensor. 2. Replace the drum unit.

Code: 424

Description: Potential sensor error: Vl adjustment K Vpl could not be adjusted to within ±5V of the target Vpl after exposure of the ID sensor patterns.
Causes: • Drum potential sensor dirty or defective • Drum worn • Poor drum ground connection
Remedy: 1. Clean or replace the drum potential sensor. 2. Replace the drum unit.

Code: 425

Description: Potential sensor error: Vl adjustment C Vpl could not be adjusted to within ±5V of the target Vpl after exposure of the ID sensor patterns.
Causes: • Drum potential sensor dirty or defective • Drum worn • Poor drum ground connection
Remedy: 1. Clean or replace the drum potential sensor. 2. Replace the drum unit.

Code: 426

Description: Potential sensor error: Vl adjustment M Vpl could not be adjusted to within ±5V of the target Vpl after exposure of the ID sensor patterns.
Causes: • Drum potential sensor dirty or defective • Drum worn • Poor drum ground connection
Remedy: 1. Clean or replace the drum potential sensor. 2. Replace the drum unit.

Code: 427

Description: Potential sensor error: Vl adjustment Y Vpl could not be adjusted to within ±5V of the target Vpl after exposure of the ID sensor patterns.
Causes: • Drum potential sensor dirty or defective • Drum worn • Poor drum ground connection
Remedy: 1. Clean or replace the drum potential sensor. 2. Replace the drum unit.

Code: 432

Description: Potential sensor error 1: Vr adjustment K Vr < –200V. The residual voltage (Vr), the amount of voltage that remains on the surface of the drum after the QL fires is less than –200V.
Causes: • Drum potential sensor dirty • Drum potential sensor defective • Drum worn
Remedy: 1. Clean or replace the drum potential sensor. 2. Replace the drum unit.

Code: 433

Description: Potential sensor error 2: Vr adjustment C Vr < –200V. The residual voltage (Vr), the amount of voltage that remains on the surface of the drum after the QL fires is less than –200V.
Causes: • Drum potential sensor dirty • Drum potential sensor defective • Drum worn
Remedy: 1. Clean or replace the drum potential sensor. 2. Replace the drum unit.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie