Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Ricoh D106 MPC2551 DI-C1.5 — Trang 22/23

Code: 877

Description: HDD Data Overwrite Security SD card error
The 'all delete' function cannot be executed but the Data Overwrite Security Unit (D377) is installed and activated.
Causes: • Defective SD card (D377) • SD card (D377) not installed
Remedy: 1. Replace the NVRAM and then install the new SD card (D362). 2. Check and reinstall the SD card (D362).

Code: 878

Description: TPM system authentication error
The system firmware is not authenticated by TPM (security chip).
Causes: • Incorrect updating for the system firmware • Defective flash ROM on the controller board
Remedy: Replace the controller board.

Code: 880

Description: File format converter error
The file format converter does not respond.
Causes: • Defective file format converter
Remedy: Replace the file format converter.

Code: 900

Description: Electric counter error
Abnormal data in the counters.
Causes: • Defective NVRAM • Defective controller
Remedy: 1. Check the connection between the NVRAM and controller. 2. Replace the NVRAM. 3. Replace the controller.

Code: 920

Description: Printer application error An error is detected in the printer application program.
Causes: • Defective software • Unexpected hardware resource (e.g., memory shortage)
Remedy: 1. Software defective; switch off/on, or change the controller firmware if the problem is not solved 2. Insufficient memory

Code: 921

Description: Printer font error
A necessary font is not found in the SD card.
Causes: • A necessary font is not found in the SD card. • The SD card data is corrupted.
Remedy: Check that the SD card has the correct data.

Code: 990

Description: Software performance error
The software makes an unexpected operation.
Causes: • Defective software • Defective controller • Software error
Remedy: 1. Turn the main switch off and on. 2. Reinstall the controller and/or engine main firmware. • See Note 1 at the end of the SC table.

Code: 991

Description: Software continuity error
The software has attempted to perform an unexpected operation. However, unlike SC 990, the object of the error is continuity of the software.
Causes: • Software program error • Internal parameter incorrect, insufficient working memory.
Remedy: This SC is not displayed on the LCD (logging only).
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie