Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Ricoh D117 MPC305SPF GR-C1 — Trang 8/21

Code: 452

Description: Paper transfer belt contact motor error
The paper transfer belt contact motor drives beyond the specified time during home position detection or contact operation.
Causes: Broken harness or defective connectors. Disconnected connector of paper transfer belt contact sensor or motor. Defective paper transfer belt contact motor. Paper transfer belt unit not installed.
Remedy: 1. Check and replace the harness and connectors. 2. Replace the paper transfer belt contact motor. 3. Reinstall the paper transfer belt unit.

Code: 460

Description: Separation power pack output error
An interrupt checks the status of the power pack every 20 ms. This SC is issued if the BICU detects a short in the power pack 10 times at D(ac).
Causes: High voltage leak. Broken harness. Defective image transfer belt unit or paper transfer unit. Defective high voltage supply unitr belt.
Remedy: 1. Check or replace the harness. 2. Reinstall or replace the image transfer belt unit or paper transfer unit. 3. Replace the high voltage supply unit.

Code: 491

Description: High voltage power: Drum/ development bias output error
An error signal is detected for 0.2 seconds when charging the drum or development.
Causes: High voltage leak. Broken harness. Defective drum unit or development unit. Defective high voltage supply unit.
Remedy: 1. Check or replace the harness. 2. Replace the drum unit or paper transfer unit. 3. Replace the high voltage supply unit.

Code: 492

Description: High voltage power: Image transfer/ paper transfer bias output error
An error signal is detected for 200 ms when charging the separation, image transfer belt or paper transfer roller.
Causes: High voltage leak. Broken harness. Defective image transfer belt unit or paper transfer unit. Defective high voltage supply unit.
Remedy: 1. Check or replace the harness. 2. Reinstall or replace the image transfer belt unit or paper transfer unit. 3. Replace the high voltage supply unit.

Code: 497

Description: Image creation temperature sensor error 1
The thermistor output of the temperature sensor is not within the prescribed range (more than 0.5 V to less than 3.0 V) for three consecutive times.
Causes:
Remedy: 1. Turn the power switch off and on.

Code: 498

Description: Temperature and humidity sensor error
The thermistor output of the temperature sensor was not within the prescribed range (more than 0.76V to less than 2.90V). The thermistor output of the humidity sensor was not within the prescribed range (2.4V or more).
Causes: Temperature and humidity sensor harness disconnected, loose, defective. Temperature and humidity sensor defective.
Remedy: 1. Check the connector and harness. 2. Replace the temperature and humidity sensor.

Code: 501

Description: 1st paper tray lift motor malfunction
The paper lift sensor does not detect paper or finish the detection within the specified time, after the tray lift motor switched on.
Causes: An obstruction (jammed paper, paper scraps, etc.) has blocked the motor drive and caused an overload. Paper lift sensor connection loose, disconnected, or damaged Paper lift sensor defective Tray lift motor connection loose, disconnected, or damaged Tray lift motor defective
Remedy: 1. Check or replace the connector and harness. 2. Replace the tray lift motor.

Code: 502

Description: 2nd paper tray lift motor malfunction (optional paper feed unit)
The paper lift sensor does not detect paper or finish the detection within the specified time, after the tray lift motor switched on.
Causes: An obstruction (jammed paper, paper scraps, etc.) has blocked the motor drive and caused an overload. Paper lift sensor connection loose, disconnected, or damaged Paper lift sensor defective Tray lift motor connection loose, disconnected, or damaged Tray lift motor defective
Remedy: 1. Check or replace the connector and harness. 2. Replace the tray lift motor.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie