Description: Log Data Error
An error was detected in the handling of the log data at power on or during machine operation. This can be caused by switching the machine off while it is operating.
Description: Administration area error
Defective the software. This error occurs in the following timing: 1. Giving a job to the printer 2. Login from the panel 3. Accessing from WEB browser
Causes: • Caused by stored un-authentication information in the software (NOT caused by user operation)
1. Reboot the machine
Description: Mechanical total counter error
The condition of the mechanical counter on the electric hard is disconnection on activating the counter when SP mode “Anti-tampering system” is ON.
Causes: • Defective harness between mechanical counter and BICU.
• Defective BICU
• Defective mechanical total counter
• Loose connection of harness between mechanical counter and BICU.
• Mechanical counter has been pulled out while accounting operation.