Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Ricoh D133 MP9002 — Trang 30/33

Code: 901

Description: Mechanical total counter error The mechanical counter is not connected.
Causes: • Mechanical total counter defective • Mechanical total counter connector not connected

Code: 910

Description: External Controller Error 1
Causes:

Code: 911

Description: External Controller Error 2
Causes:

Code: 912

Description: External Controller Error 3
Causes:

Code: 913

Description: External Controller Error 4
Causes:

Code: 914

Description: External Controller Error 5
Causes:

Code: 915

Description: External Controller Error 6 Egret board error
Causes: The external controller alerted the machine about an error.

Code: 919

Description: External Controller Error 6 While EAC (External Application Converter), the conversion module, was operating normally, the receipt of a power line interrupt signal from the FLUTE serial driver was detected, of BREAK signal from the other station was detected.
Causes: • Power outage at the EFI controller. • EFI controller was rebooted. • Connection to EFI controller loose.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie