Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Ricoh D135 MPC6502SP CH-C1 — Trang 42/63

Code: SC672-12

Description: Controller start up error Communication with controller was interrupted after a normal startup.
Causes: • Controller stalled • Board installed incorrectly • Controller board defective • Operation panel connector loose, broken, or defective • Controller late
Remedy: • Turn the main power off/on. • Check the connection of the controller board. • Replace the controller board. • Check the control panel harness.

Code: SC672-13

Description: Controller start up error The operation panel detected that the controller is down.
Causes: • Controller stalled • Board installed incorrectly • Controller board defective • Operation panel connector loose, broken, or defective • Controller late
Remedy: • Turn the main power off/on. • Check the connection of the controller board. • Replace the controller board. • Check the control panel harness.

Code: SC672-99

Description: Controller start up error The operation panel software ended abnormally.
Causes: • Controller stalled • Board installed incorrectly • Controller board defective • Operation panel connector loose, broken, or defective • Controller late
Remedy: • Turn the main power off/on. • Check the connection of the controller board. • Replace the controller board. • Check the control panel harness.

Code: SC681

Description: Toner Cartridge: ID Chip Communication Error. Errors defined in I2C communication • When abnormality occurs at cable connection • When error notification was received during communication with the tag and operation is not resumed after 3 retries. SC681-01 D Toner Supply: ID Chip Communication Error (K_Invalid Device ID) SC681-02 D Toner Supply: ID Chip Communication Error (M_Invalid Device ID) SC681-03 D Toner Supply: ID Chip Communication Error (C_Invalid Device ID) SC681-04 D Toner Supply: ID Chip Communication Error (Y_Invalid Device ID) SC681-05 D Toner Supply: ID Chip Communication Error (K_Channel error (e.g. bus disconnection)) SC681-06 D Toner Supply: ID Chip Communication Error (M_Channel error (e.g. bus disconnection)) SC681-07 D Toner Supply: ID Chip Communication Error (C_Channel error (e.g. bus disconnection)) SC681-08 D Toner Supply: ID Chip Communication Error (Y_Channel error (e.g. bus disconnection)) SC681-09 D Toner Supply: ID Chip Communication Error (K_Device Error (No ID chip)) SC681-11 D Toner Supply: ID Chip Communication Error (M_Device Error (No ID chip)) SC681-12 D Toner Supply: ID Chip Communication Error (C_Device Error (No ID chip)) SC681-13 D Toner Supply: ID Chip Communication Error (Y_Device Error (No ID chip)) SC681-14 D Toner Supply: ID Chip Communication Error (K_Communication aborted (error during communication)) SC681-16 D Toner Supply: ID Chip Communication Error (M_Communication aborted (error during communication)) SC681-17 D Toner Supply: ID Chip Communication Error (C_Communication aborted (error during communication)) SC681-18 D Toner Supply: ID Chip Communication Error (Y_Communication aborted (error during communication)) SC681-19 D Toner Supply: ID Chip Communication Error (K_Communication timeout) SC681-21 D Toner Supply: ID Chip Communication Error (M_Communication timeout) SC681-22 D Toner Supply: ID Chip Communication Error (C_Communication timeout) SC681-23 D Toner Supply: ID Chip Communication Error (Y_Communication timeout) SC681-24 D Toner Supply: ID Chip Communication Error (K_Device stopped (logically stopped)) SC681-26 D Toner Supply: ID Chip Communication Error (M_Device stopped (logically stopped)) SC681-27 D Toner Supply: ID Chip Communication Error (C_Device stopped (logically stopped)) SC681-28 D Toner Supply: ID Chip Communication Error (Y_Device stopped (logically stopped)) SC681-29 D Toner Supply: ID Chip Communication Error (K_Requested buffer full) SC681-31 D Toner Supply: ID Chip Communication Error (M_Requested buffer full) SC681-32 D Toner Supply: ID Chip Communication Error (C_Requested buffer full) SC681-33 D Toner Supply: ID Chip Communication Error (Y_Requested buffer full) SC681-34 D Toner Supply: ID Chip Communication Error (K_No error code) SC681-35 D Toner Supply: ID Chip Communication Error (M_No error code) SC681-36 D Toner Supply: ID Chip Communication Error (C_No error code) SC681-37 D Toner Supply: ID Chip Communication Error (Y_No error code) SC681-38 D Toner Supply: ID Chip Communication Error (K_Invalid Device ID) SC681-39 D Toner Supply: ID Chip Communication Error (M_Invalid Device ID)
Causes: There was an error during (wired) communication with the ID chip on the toner bottle. SC681-01 to 04: Device ID data corrupted. SC681-06 to 09: Contact fault (e.g. Bus disconnection) SC681-11 to 14: No ID chip SC681-16 to 19/21 to 24/26 to 39: Noise SC681-31 to 34/36 to 39: Software problem • Toner supply set error • ID chip defective • Harness broken • BCU damaged • IOB damaged • TSB damaged • TCB damaged • Unintended noise
Remedy: • Cycle the machine off/on. • Set the toner supply again. • Replace the ID chip. • Fix the harness. • Replace the BCU board. • Replace the IOB. • Replace the TSB. • Replace the TCB.

Code: SC682

Description: PCU: ID Chip Communication Error. Errors defined in I2C communication • When abnormality occurs at cable connection • When error notification was received during communication with the tag and operation is not resumed after 3 retries. SC682-01 D PCU: ID Chip Communication Error(K_Invalid Device ID) SC682-02 D PCU: ID Chip Communication Error(M_Invalid Device ID) SC682-03 D PCU: ID Chip Communication Error(C_Invalid Device ID) SC682-04 D PCU: ID Chip Communication Error(Y_Invalid Device ID) SC682-05 D PCU: ID Chip Communication Error(K_Channel error (e.g. bus disconnection)) SC682-06 D PCU: ID Chip Communication Error(M_Channel error (e.g. bus disconnection)) SC682-07 D PCU: ID Chip Communication Error(C_Channel error (e.g. bus disconnection)) SC682-08 D PCU: ID Chip Communication Error(Y_Channel error (e.g. bus disconnection)) SC682-09 D PCU: ID Chip Communication Error(K_Device Error (No ID chip)) SC682-11 D PCU: ID Chip Communication Error(M_Device Error (No ID chip)) SC682-12 D PCU: ID Chip Communication Error(C_Device Error (No ID chip)) SC682-13 D PCU: ID Chip Communication Error(Y_Device Error (No ID chip)) SC682-14 D PCU: ID Chip Communication Error(K_Communication aborted (error during communication)) SC682-16 D PCU: ID Chip Communication Error(M_Communication aborted (error during communication)) SC682-17 D PCU: ID Chip Communication Error(C_Communication aborted (error during communication)) SC682-18 D PCU: ID Chip Communication Error(Y_Communication aborted (error during communication)) SC682-19 D PCU: ID Chip Communication Error(K_Communication timeout) SC682-21 D PCU: ID Chip Communication Error(M_Communication timeout) SC682-22 D PCU: ID Chip Communication Error(C_Communication timeout) SC682-23 D PCU: ID Chip Communication Error(Y_Communication timeout) SC682-24 D PCU: ID Chip Communication Error(K_Device stopped (logically stopped)) SC682-26 D PCU: ID Chip Communication Error(M_Device stopped (logically stopped)) SC682-27 D PCU: ID Chip Communication Error(C_Device stopped (logically stopped)) SC682-28 D PCU: ID Chip Communication Error(Y_Device stopped (logically stopped)) SC682-29 D PCU: ID Chip Communication Error(K_Requested buffer full) SC682-31 D PCU: ID Chip Communication Error(M_Requested buffer full) SC682-32 D PCU: ID Chip Communication Error(C_Requested buffer full) SC682-33 D PCU: ID Chip Communication Error(Y_Requested buffer full) SC682-34 D PCU: ID Chip Communication Error(K_No error code) SC682-35 D PCU: ID Chip Communication Error(M_No error code) SC682-36 D PCU: ID Chip Communication Error(C_No error code) SC682-37 D PCU: ID Chip Communication Error(Y_No error code) SC682-38 D PCU: ID Chip Communication Error(K_Invalid Device ID) SC682-39 D PCU: ID Chip Communication Error(M_Invalid Device ID)
Causes: There was an error during (wired) communication with the ID chip on the toner bottle. • PCU set error • HST sensor defective • Harness broken • BCU damaged • IOB damaged • Unintended noise
Remedy: • Set the PCU again. • Replace the HST sensor. • Fix the harness. • Replace the BCU board. • Replace the IOB.

Code: SC684

Description: Fusing: ID Chip Communication Error. Errors defined in I2C communication. SC684-01 D Fusing: ID Chip Communication Error(Invalid Device ID) SC684-02 D Fusing: ID Chip Communication Error(Channel error (e.g. bus disconnection)) SC684-03 D Fusing: ID Chip Communication Error(Device Error (No ID chip)) SC684-04 D Fusing: ID Chip Communication Error(Communication aborted (error during communication)) SC684-05 D Fusing: ID Chip Communication Error(Communication timeout) SC684-06 D Fusing: ID Chip Communication Error(Device stopped (logically stopped)) SC684-07 D Fusing: ID Chip Communication Error(Requested buffer full) SC684-08 D Fusing: ID Chip Communication Error(No error code)
Causes: • Fusing unit set error • ID chip defective • Harness broken • IOB damaged • Unintended noise
Remedy: • Set the fusing unit again. • Replace the ID chip. • Fix the harness. • Replace the IOB.

Code: SC685-00

Description: DC Power Supply Voltage Error Uses the power supply status signal monitored by the VODKA on the IOB. Tracks for 1 second from the time the converter SW trigger turns ON (SWTRG1=0 to 1). Target: 24VS1-N
Causes: • PSU malfunctioning • IOB malfunctioning • Connecter disconnected • Harness broken or ground fault • Load fault
Remedy: • Replace the PSU. • Replace the IOB. • Set the connector again. • Replace the harness. • Replace the part where ground fault occurred. • Turn the main power off/on.

Code: SC687-00

Description: PER Not Received Error Unable to receive the PER command from the controller.
Causes: • Communication error
Remedy: • Cycle the machine off/on.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie