Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Ricoh D135 MPC6502SP CH-C1 — Trang 46/63

Code: SC720-30

Description: Jogger Motor Error (2000/3000) • Motor driver detected an error (short-circuit or overheat). (SC from the first time) • When moving to the home position, home position was not detected within specified number of pulses (p0 pulses). (The first time: jam display, the second time: SC) • When moving from the home position, home position was still detected after specified number of pulses (p1 pulses). (The first time: jam display, the second time: SC)
Causes: • Motor defective • Connecter disconnected • Overload • Home position sensor defective
Remedy: • Check the connections of the motor and home position sensor. • Replace the motor/home position sensor. • Replace the PCB.

Code: SC720-33

Description: Positioning Roller Motor Error (2000/3000) • Motor driver detected an error (short-circuit or overheat). (SC from the first time) • When moving to the home position, home position was not detected within specified number of pulses (p0 pulses). (The first time: jam display, the second time: SC) • When moving from the home position, home position was still detected after specified number of pulses (p1 pulses). (The first time: jam display, the second time: SC)
Causes: • Motor defective • Connecter disconnected • Overload • Home position sensor defective
Remedy: • Check the connections of the motor and home position sensor. • Replace the motor/home position sensor. • Replace the PCB.

Code: SC720-41

Description: Feed Out Motor Error (2000/3000) • Motor driver detected an error (short-circuit or overheat). (SC from the first time) • When moving to the home position, home position was not detected within specified number of pulses (p0 pulses). (The first time: jam display, the second time: SC) • When moving from the home position, home position was still detected after specified number of pulses (p1 pulses). (The first time: jam display, the second time: SC)
Causes: • Motor defective • Connecter disconnected • Overload • Home position sensor defective
Remedy: • Check the connections of the motor and home position sensor. • Replace the motor/home position sensor. • Replace the PCB.

Code: SC720-42

Description: Corner Stapler Movement Motor Error (2000/3000) • Motor driver detected an error (short-circuit or overheat). (SC from the first time) • When moving to the home position, home position was not detected within specified number of pulses (p0 pulses). (The first time: jam display, the second time: SC) • When moving from the home position, home position was still detected after specified number of pulses (p1 pulses). (The first time: jam display, the second time: SC)
Causes: • Motor defective • Connecter disconnected • Overload • Home position sensor defective
Remedy: • Check the connections of the motor and home position sensor. • Replace the motor/home position sensor. • Replace the PCB.

Code: SC720-44

Description: Corner Stapling Motor Error (D703/D704) • When moving to the home position, home position was not detected within specified time (t0 sec). (The first time: jam display, the second time: SC) • When moving from the home position, home position was still detected after specified time (t1 sec). (The first time: jam display, the second time: SC)
Causes: • Motor defective • Connecter disconnected • Overload • Home position sensor defective
Remedy: • Check the connections of the motor and home position sensor. • Replace the motor/home position sensor. • Replace the PCB.

Code: SC720-50

Description: Booklet Jogger Motor Error (2000/3000) • Motor driver detected an error (short-circuit or overheat). (SC from the first time) • When moving to the home position, home position was not detected within specified number of pulses (p0 pulses). (The first time: jam display, the second time: SC) • When moving from the home position, home position was still detected after specified number of pulses (p1 pulses). (The first time: jam display, the second time: SC)
Causes: • Motor defective • Connecter disconnected • Overload • Home position sensor defective
Remedy: • Check the connections of the motor and home position sensor. • Replace the motor/home position sensor. • Replace the PCB.

Code: SC720-51

Description: Booklet Guide Motor Error (2000/3000) • Motor driver detected an error (short-circuit or overheat). (SC from the first time) • When moving to the home position, home position was not detected within specified number of pulses (p0 pulses). (The first time: jam display, the second time: SC) • When moving from the home position, home position was still detected after specified number of pulses (p1 pulses). (The first time: jam display, the second time: SC)
Causes: • Motor defective • Connecter disconnected • Overload • Home position sensor defective
Remedy: • Check the connections of the motor and home position sensor. • Replace the motor/home position sensor. • Replace the PCB.

Code: SC720-53

Description: Booklet Fence Motor Error (2000/3000) • Motor driver detected an error (short-circuit or overheat). (SC from the first time) • When moving to the home position, home position was not detected within specified number of pulses (p0 pulses). (The first time: jam display, the second time: SC) • When moving from the home position, home position was still detected after specified number of pulses (p1 pulses). (The first time: jam display, the second time: SC)
Causes: • Motor defective • Connecter disconnected • Overload • Home position sensor defective
Remedy: • Check the connections of the motor and home position sensor. • Replace the motor/home position sensor. • Replace the PCB.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie