Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Ricoh D136 MPC8002SP CH-C1 — Trang 20/63

Code: SC403-04

Description: Development Start Voltage (Vk) High Error (Y). Development Start Voltage (Vk) > 300 [-V] Details: This SC is issued when the development start voltage measured during process control exceeded 300[-V].
Causes: • Toner density error
Remedy: • Replace the developer.

Code: SC404-01

Description: Development Start Voltage (Vk) Low Error (K). Development Start Voltage (Vk) < 300 [-V] Details: This SC is issued when the development start voltage measured during process control was smaller than 300[-V].
Causes: • Toner density error • Condensation
Remedy: • Replace the developer. • If condensation has formed, wait a while and repeat process control.

Code: SC404-02

Description: Development Start Voltage (Vk) Low Error (C). Development Start Voltage (Vk) < 300 [-V] Details: This SC is issued when the development start voltage measured during process control was smaller than 300[-V].
Causes: • Toner density error • Condensation
Remedy: • Replace the developer. • If condensation has formed, wait a while and repeat process control.

Code: SC404-03

Description: Development Start Voltage (Vk) Low Error (M). Development Start Voltage (Vk) < 300 [-V] Details: This SC is issued when the development start voltage measured during process control was smaller than 300[-V].
Causes: • Toner density error • Condensation
Remedy: • Replace the developer. • If condensation has formed, wait a while and repeat process control.

Code: SC404-04

Description: Residual Voltage (Vr) Detection Error (K). Development Start Voltage (Vk) Low Error (Y). Development Start Voltage (Vk) < 300 [-V] Details: This SC is issued when the development start voltage measured during process control was smaller than 300[-V].
Causes: • Toner density error • Condensation
Remedy: • Replace the developer. • If condensation has formed, wait a while and repeat process control.

Code: SC410-01

Description: Residual Voltage (Vr) > 200[-V] Details: This SC is issued when the residual voltage measured duringprocess control exceeded 200 [-V].
Causes: • Toner density error • Condensation
Remedy: • Replace the developer. • If condensation has formed, wait a while and repeat process control.

Code: SC410-02

Description: Residual Voltage (Vr) Detection Error (C). Residual Voltage (Vr) > 200[-V] Details: This SC is issued when the residual voltage measured duringprocess control exceeded 200 [-V].
Causes: • Toner density error • Condensation
Remedy: • Replace the developer. • If condensation has formed, wait a while and repeat process control.

Code: SC410-03

Description: Residual Voltage (Vr) Detection Error (M). Residual Voltage (Vr) > 200[-V] Details: This SC is issued when the residual voltage measured duringprocess control exceeded 200 [-V].
Causes: • Toner density error • Condensation
Remedy: • Replace the developer. • If condensation has formed, wait a while and repeat process control.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie