Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Ricoh D136 MPC8002SP CH-C1 — Trang 31/63

Code: SC526-02

Description: Transport Motor 2 Rotation Error 2 seconds after motor startup, the motor lock error signal (LOCK signal) was detected for 1200 msec or more.
Causes: • Motor defective • Harness broken • Circuit board defective
Remedy: • Replace the motor. • Reconnect the connector.

Code: SC527

Description: SC527-01 D Cooling Fan Alarm 1 SC527-02 D Cooling Fan Alarm 2 SC527-03 D Cooling Fan Alarm 3 SC527-04 D Cooling Fan Alarm SC527-05 D Exhaust Fan Alarm 1 SC527-06 D Exhaust Fan Alarm 2 SC527-07 D Exhaust Fan Alarm 3 SC527-08 D Exhaust Fan Alarm 4. When a motor is on, the lock sensor is checked every 100 milliseconds. If lock signal is missing 51 times consecutively, the machine determines that the motor is not running correctly.
Causes: • Motor defective • Connecter disconnected • Harness broken • IOB defective
Remedy: • Replace the motor. • Reconnect the connector. • Replace the harness. • Replace the IOB.

Code: SC530

Description: SC530-01 D Fusing Pressure Roller Intake Fan Lock (D137/D138 only) SC530-02 D Fusing Pressure Roller Exhaust Fan Lock (D137/D138 only) SC530-03 D Heat Pipe Panel Intake Fan Lock SC530-04 D Heat Pipe Panel Exhaust Fan Lock SC530-05 D Fusing Exit Exhaust Fan Lock SC530-06 D ITB Cleaning Intake Fan Lock SC530-07 D IH Coil Cooling Fan Lock. SC530-08 D PTR Fusing Exhaust Fan Lock SC530-09 D IH Coil Power Cooling Fan Lock. When a motor is on, the lock sensor is checked every 100 milliseconds. If lock signal is missing 51 times consecutively, the machine determines that the motor is not running correctly.
Causes: • Motor defective • Connecter disconnected • Harness broken • IOB defective
Remedy: • Replace the motor. • Reconnect the connector. • Replace the harness. • Replace the IOB.

Code: SC531

Description: SC531-01 D Development Intake Fan/Y Lock SC531-02 D Development Intake Fan/M Lock SC531-03 D Development Intake Fan/C Lock SC531-04 D Development Intake Fan/K Lock SC531-05 D Development Exhaust Fan/Right Lock SC531-06 D Development Exhaust Fan/Left Lock. When a motor is on, the lock sensor is checked every 100 milliseconds. If lock signal is missing 51 times consecutively, the machine determines that the motor is not running correctly.
Causes: • Motor defective • Connecter disconnected • Harness broken • IOB defective
Remedy: • Replace the motor. • Reconnect the connector. • Replace the harness. • Replace the IOB.

Code: SC532

Description: SC532-02 D Controller Exhaust Fan Lock SC532-03 D PSU Fan/Right Lock SC532-04 D PSU Fan/Left Lock. When a motor is on, the lock sensor is checked every 100 milliseconds. If lock signal is missing 51 times consecutively, the machine determines that the motor is not running correctly.
Causes: • Motor defective • Connecter disconnected • Harness broken • IOB defective
Remedy: • Replace the motor. • Reconnect the connector. • Replace the harness. • Replace the IOB.

Code: SC533

Description: SC533-01 D Laser Unit Cooling Fan/Right Lock SC533-02 D Laser Unit Cooling Fan/Left Lock. When a motor is on, the lock sensor is checked every 100 milliseconds. If lock signal is missing 51 times consecutively, the machine determines that the motor is not running correctly.
Causes: • Motor defective • Connecter disconnected • Harness broken • IOB defective
Remedy: • Replace the motor. • Reconnect the connector. • Replace the harness. • Replace the IOB.

Code: SC534

Description: SC534-01 D Duplex Exhaust Fan/Front Lock SC534-02 D Duplex Exhaust Fan/Rear Lock. SC534-03 D Duplex Exhaust Fan/Middle Lock. When a motor is on, the lock sensor is checked every 100 milliseconds. If lock signal is missing 51 times consecutively, the machine determines that the motor is not running correctly.
Causes: • Motor defective • Connecter disconnected • Harness broken • IOB defective
Remedy: • Replace the motor. • Reconnect the connector. • Replace the harness. • Replace the IOB.

Code: SC535-02

Description: Drive Exhaust Fan Lock. When a motor is on, the lock sensor is checked every 100 milliseconds. If lock signal is missing 51 times consecutively, the machine determines that the motor is not running correctly.
Causes: • Motor defective • Connecter disconnected • Harness broken • IOB defective
Remedy: • Replace the motor. • Reconnect the connector. • Replace the harness. • Replace the IOB.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie