Description: Controller-to-operation panel communication error at startup After powering on the machine, the communication circuit between the controller and the operation panel is not opened, or communication with controller is interrupted after a normal startup.
Description: Transmission error in controller board Video transmission error is detected in the controller board.
Causes: -01 M2P error M2P error is occurred during transmitting the video data to the ASIC. • Defective Controller Board 1. Turn the main switch off and on. 2. Replace the controller board. -02 PCI error ASIC could not access to the PCI. • Defective Controller Board 1. Turn the main switch off and on. 2. Replace the controller board.
Description: Memory address (PER) command error The BCU did not receive a memory address command from the controller with the prescribed time once the paper reached the registration sensor.
Description: GAVD communication error • The I2C bus device ID is not identified during initialization. • A device-status error occurs during I2C bus communication. • The I2C bus communication is not established due to an error other than a buffer shortage.
Description: Upper transport motor error The upper transport motor in the finisher is not operating.
Causes: • Upper transport motor drive is obstructed (jammed paper, paper scraps, etc.) • The motor harness loose or broken • Upper transport motor defective
Remedy: 1. Check for blockages in the upper transport motor mechanism. 2. Replace the upper transport motor. 3. Replace the finisher main board.
Description: Front fence motor error The jogger fence motor in the finisher is not operating.
Causes: • Jogger motor drive is obstructed (jammed paper, paper scraps, etc.) • The motor harness loose or broken • Jogger fence HP sensor dirty, loose, defective • Jogger fence motor defective
Remedy: 1. Check the connections and cables for the components mentioned above. 2. Check for blockages in the jogger fence motor mechanism. 3. Replace the jogger fence HP sensor and/or jogger motor. 4. Replace the finisher main board.
Nhận ưu đãi sớm nhất khi chương trình diễn ra
Đăng ký nhận bản tin
Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này.
Chính sách cookie
Những cookie này là cần thiết để trang web hoạt động đúng cách.
Những cookie này giúp chúng tôi hiểu cách khách truy cập tương tác với trang web.
Những cookie này được sử dụng để cung cấp quảng cáo cá nhân hóa.