Mã lỗi Ricoh D161 MP2501L K-C4
Code:
Tất cả lỗi (98)
101
101-01
101-02
102
120
121
141
142
144
161-01
161-02
165
195
202
203
204
220
230
231
240
270
302
320
321
322
350
351
353
354
355
389
390
391
392
440
460
490
501
502
503
503-01-11
503-02-12
504
504-01-11
504-02-12
508
520
521
521-01-11
530
531
532
541
542
542-01
542-03
543
544
545
547
547-01
547-02
547-03
551
552
552-01
552-03
553
554
555
557
559
590
591
620
621
622
632
634
635
669
681
687
692
694
701-03
701-08
702-01
702-02
702-03
760
901
903
928
929
981
982
995
Description: Exposure Lamp Error (D160/D161/D170) The standard white level was not detected properly when scanning the white plate.
Causes: • Defective LED • Defective harness • Dirty scanner mirror or scanner mirror out of position
Description: Exposure Lamp Error (D158/D159) The standard white level was not detected properly when scanning the white plate.
Causes: • Exposure lamp • Exposure lamp stabilizer • Exposure lamp connector • Dirty scanner mirror or scanner mirror out of position • SBU board • SBU connector • Lens block out of position
Description: Exposure Lamp Error (LED light adjustment) (D158/D159) LED error flag is on
Causes: • Defective LED • Defective LED driver • Defective harness
Description: LED light adjustment error (D158/D159) Reading white plate level is over prescribed rate.
Causes: • Defective LED • Defective LED driver • Defective SBU • Defective BICU • Defective harness
Description: Scanner home position error 1 The scanner home position sensor does not detect the off condition during initialization or copying.
Causes: • Scanner home position sensor • Scanner drive motor • Scanner home position sensor connector • Scanner drive motor connector • BICU board
Description: Scanner home position error 2 The scanner home position sensor does not detect the on condition during initialization or copying.
Causes: • Scanner home position sensor • Scanner drive motor • Scanner home position sensor connector • Scanner drive motor connector • BICU board
Description: Black level correction error Black level is over prescribed rate.
Causes: • Defective SBU • Defective BICU • Defective harness
Description: White level correction error White level is over prescribed rate.
Causes: • Defective SBU • Defective LED • Defective LED driver • Defective BICU • Defective harness • Scanner unit condensation • Dirty scanner mirror or lens • Dirty platen sheet