Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Ricoh D176 MPC2003 MET-C1 — Trang 5/45

Code: SC231-01

Description: FGATE OFF error: Bk • The FGATE signal did not turn OFF within T1 sec. after the writing process of the corresponding color ended. • The FGATE signal did not turn OFF when the next job of the corresponding color started.
Causes: • GAVD defective • Image processing ASIC defective
Remedy: • Turn the power off/on. • Replace the IPU board. • Replace the controller board. Service Call 201-285 521

Code: SC231-02

Description: FGATE OFF error: Cy • The FGATE signal did not turn OFF within T1 sec. after the writing process of the corresponding color ended. • The FGATE signal did not turn OFF when the next job of the corresponding color started.
Causes: • GAVD defective • Image processing ASIC defective
Remedy: • Turn the power off/on. • Replace the IPU board. • Replace the controller board. Service Call 201-285 521

Code: SC231-03

Description: FGATE OFF error: Ma • The FGATE signal did not turn OFF within T1 sec. after the writing process of the corresponding color ended. • The FGATE signal did not turn OFF when the next job of the corresponding color started.
Causes: • GAVD defective • Image processing ASIC defective
Remedy: • Turn the power off/on. • Replace the IPU board. • Replace the controller board. Service Call 201-285 521

Code: SC231-04

Description: FGATE OFF error: Ye • The FGATE signal did not turn OFF within T1 sec. after the writing process of the corresponding color ended. • The FGATE signal did not turn OFF when the next job of the corresponding color started.
Causes: • GAVD defective • Image processing ASIC defective
Remedy: • Turn the power off/on. • Replace the IPU board. • Replace the controller board. Service Call 201-285 521

Code: SC240-01

Description: LD error: Bk • If LD error terminal of LD driver of corresponding color is asserted after LD initialization. • If an error is detected during initialization of P-MAC which detects Ith/Ieta of LD of corresponding color.
Causes: • LD degradation (LD broken, shift of output characteristics etc.) • The interface harness damaged or not connected correctly. • LD driver defective
Remedy: • Cycle the main power off/on • Replace the LD unit • Replace the harness • Replace the IPU board

Code: SC240-04

Description: LD error: Ma • If LD error terminal of LD driver of corresponding color is asserted after LD initialization. • If an error is detected during initialization of P-MAC which detects Ith/Ieta of LD of corresponding color.
Causes: • LD degradation (LD broken, shift of output characteristics etc.) • The interface harness damaged or not connected correctly. • LD driver defective
Remedy: • Cycle the main power off/on • Replace the LD unit • Replace the harness • Replace the IPU board

Code: SC272-01

Description: G-MAC communication error: Bk In view of parity, 3 retries were performed
Causes: • IPU defective • Harness defective • LDB defective
Remedy: • Cycle the main power off/on • Replace the LD unit • Replace the harness • Replace the IPU board

Code: SC272-02

Description: G-MAC communication error: Cy In view of parity, 3 retries were performed
Causes: • IPU defective • Harness defective • LDB defective
Remedy: • Cycle the main power off/on • Replace the LD unit • Replace the harness • Replace the IPU board
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie