Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Ricoh D219 MPC306ZSP GR-C2 — Trang 16/29

Code: 651-02

Description: Illegal Remote Service Dial-up (Chat program execution error) An unexpected error occurred when RC Gate dialed up the NRS Center.
Causes: Software bug
Remedy: Logging only.

Code: 652-00

Description: Remote service ID2 mismatching There was an authentication mismatch between ID2 for @Remote, the controller board, and NVRAM.
Causes: • Used controller board installed • Used NVRAM installed (such action is not allowed.)
Remedy: • If this occurs during RC Gate installation: Check the validity of the certificate and the NVRAM, check the machine serial number, write the common certificate, and then begin installation again. • If this occurs after RC Gate installation: Clear the RC Gate install status, check the validity of the certificate and the NVRAM, check the machine serial number, write the common certificate, and then begin installation again.

Code: 653-00

Description: Incorrect remote service ID2 ID2 stored in the NVRAM has either of the following problems. • Number of characters is not 17. • Includes a character that cannot be printed. • All spaces • NULL
Causes: Replace the NVRAM.
Remedy: Clear the RC Gate install status, write the common certificate, and then begin installation again.

Code: 664-01

Description: ASIC – SRAM Communication error • When the machine starts or returns from the energy saver mode, a connection error signal between ASIC and SRAM device is detected.
Causes: • Defective BiCU
Remedy: • Cycle the power off/on. • Replace the BiCU.

Code: 665-05

Description: Master control signal connection error. When the machine starts or returns from the energy saver mode, a connection error signal between CPU and slave device is detected, or the machine cannot access all I/O IPU-ASICs correctly. SC665-11 through -031: When the machine starts or returns from the energy saver mode, a connection error between CPU and ASIC is detected.
Causes: 1. Incorrect FFC connection 2. Damaged FFC (disconnection or dust) 3. BiCU failure (Deteriorated board, sticking dust, or damaged parts)
Remedy: • Cycle the power off/on. • Replace the BiCU.

Code: 665-06

Description: IPU/IOB control signal connection error. When the machine starts or returns from the energy saver mode, a connection error signal between CPU and slave device is detected, or the machine cannot access all I/O IPU-ASICs correctly. SC665-11 through -031: When the machine starts or returns from the energy saver mode, a connection error between CPU and ASIC is detected.
Causes: 1. Incorrect FFC connection 2. Damaged FFC (disconnection or dust) 3. BiCU failure (Deteriorated board, sticking dust, or damaged parts)
Remedy: • Cycle the power off/on. • Replace the BiCU.

Code: 665-07

Description: IPU control signal connection error. When the machine starts or returns from the energy saver mode, a connection error signal between CPU and slave device is detected, or the machine cannot access all I/O IPU-ASICs correctly. SC665-11 through -031: When the machine starts or returns from the energy saver mode, a connection error between CPU and ASIC is detected.
Causes: 1. Incorrect FFC connection 2. Damaged FFC (disconnection or dust) 3. BiCU failure (Deteriorated board, sticking dust, or damaged parts)
Remedy: • Cycle the power off/on. • Replace the BiCU.

Code: 665-11

Description: ASIC connection error. When the machine starts or returns from the energy saver mode, a connection error signal between CPU and slave device is detected, or the machine cannot access all I/O IPU-ASICs correctly. SC665-11 through -031: When the machine starts or returns from the energy saver mode, a connection error between CPU and ASIC is detected.
Causes: 1. Incorrect FFC connection 2. Damaged FFC (disconnection or dust) 3. BiCU failure (Deteriorated board, sticking dust, or damaged parts)
Remedy: • Cycle the power off/on. • Replace the BiCU.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie