Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Ricoh D220 MPC306ZSPF GR-C2 — Trang 25/29

Code: 865-00

Description: HD access error During HDD operation, the HDD returned an error.
Causes: The HDD returned an error that does not constitute SC863 (bad sector) or SC864 (CRC error).
Remedy: Replace the HDD.

Code: 865-01

Description: HDD access error During HDD operation, the HDD returned an error.
Causes: The HDD returned an error that does not constitute SC863 (bad sector) or SC864 (CRC error). (An error occurred in an area that does not belong to a partition, such as the disk label area.)
Remedy: Replace the HDD.

Code: 865-02 ... 865-23

Description: HDD access error During HDD operation, the HDD returned an error.
Causes: The HDD returned an error that does not constitute SC863 (bad sector) or SC864 (CRC error). (An error occurred in partition "a" (SC865-02) to partition “v” (SC865-23)).
Remedy: Replace the HDD.

Code: 865-50 ... 865-73

Description: HDD time-out error The machine does not detect a reply from the HDD during the HDD operation.
Causes: The HDD does not respond to the read/ write command from the machine.
Remedy: • Check the harness connections between the controller board and HDD. • Replace the HDD.

Code: 866-00

Description: SD card authentication error A license error of an application that is started from the SD card was detected.
Causes: Invalid program data is stored on the SD card.
Remedy: Store a valid program data on the SD card.

Code: 867-00

Description: SD card removed The SD card was removed while the machine is on.
Causes: An application SD card has been removed from the slot (mount point of /mnt/ sd0).
Remedy: Cycle the main power off and on.

Code: 867-01

Description: SD card removed The SD card was removed while the machine is on.
Causes: An application SD card has been removed from the slot (mount point of /mnt/ sd1).
Remedy: Cycle the main power off and on.

Code: 867-02

Description: SD card removed The SD card was removed while the machine is on.
Causes: An application SD card has been removed from the slot (mount point of /mnt/ sd2).
Remedy: Cycle the main power off and on.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie