Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Ricoh D249 MP2554 Cor-C1 — Trang 31/40

Code: SC819-00

Description: Kernel halt error [xxxx]: Detailed error code Due to a control error, a RAM overflow occurred during system processing. One of thefollowing messages was displayed on the operation panel.
Causes: • Software defective • Insufficient memory • Hardware driver defective (RAM, FLASH memory)
Remedy: • Turn the main power off/on. • Replace the HDD. • Repace the memory • Replace the controller board. • Fix the software

Code: SC820-00

Description: Self-diagnostics error: CPU [xxxx]: Detailed error code
Causes: • System firmware problem • Defective controller • Defective RAM-DIMM
Remedy: • Reinstall the controller system software. • Replace the RAM-DIMM. • Replace the controller.

Code: SC821-00

Description: Self-diagnostics error: ASIC [xxxx]: Detailed error code
Causes: Defective ASIC device
Remedy: Replace the controller board.

Code: SC822-00

Description: Self-diagnostic error: HDD [xxxx]: Detailed error code
Causes: [3003] HDD timeout Check performed only when HDD is installed: • HDD device busy for over 31sec. • After a diagnostic command is set for the HDD, but the device remains busy for over 6sec.. • HDD defective • HDD harness disconnected, defective • Controller board defective • Replace the HDD. • Replace the HDD connector. • Replace the controller board. [3004] Diagnostic command error No response to the self-diagnostic command from the ASIC to the HDD. HDD defective Replace the HDD.
Remedy:

Code: SC823-00

Description: Self-diagnostics error: NIC [XXXX]: Detailed error code.
Causes: • Defective SEEP ROM • Defective I2C bus (connection)
Remedy: Replace the controller board.

Code: SC824-00

Description: Self-diagnostics error: NVRAM (resident) [XXXX]: Detailed error code
Causes: [1401] NVRAM verify error NVRAM device is missing or NVRAM device is damaged. • The NVRAM device is missing. • The NVRAM device is damaged. • NVRAM backup battery exhausted • NVRAM socket damaged
Remedy: Replace the NVRAM device.

Code: SC827-00

Description: Self-diagnostic error: Standard SDRAM DIMM [XXXX]: Detailed error code
Causes: [0201] Verification error Error detected during a write/verify check for the standard RAM (SDRAM DIMM). • Loose connection • Defective SDRAM DIMM • Defective controller Replace the controller board or RAM DIMM. [0202] Resident memory error The SPD values in all RAM DIMM are incorrect or unreadable. • Defective RAM DIMM • Defective SPD ROM on RAM DIMM • Defective 12C bus Replace the RAM DIMM
Remedy:

Code: SC828-00

Description: Self-diagnostic error: ROM [xxxx]: Detailed error code
Causes: [0101] Check sum error 1 The boot monitor and OS program stored in the ROM DIMM is checked. If the check sum of the program is incorrect, this SC code is displayed. • Defective FLASH ROM device • Defective CPU device
Remedy: Replace the controller board.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie