Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Ricoh DX4544C — Trang 2/3

Code: E-13

Description: Scanner error The scanner HP sensor does not turn on after the scanner motor has moved for more than 7.0 seconds back to home position after scanning. The scanner cannot leave the home position within 2.0 seconds of power on. Just after switching the power on, the scanner cannot return to the home position within 2.0 seconds of leaving.
Causes: Scanner drive Scanner HP sensor Scanner motor

Code: E-17

Description: Drum Thermistor Open The thermistor output voltage is over 4.9 volts.
Causes: Thermistor connector Thermistor

Code: E-18

Description: Drum Overheat The temperature of the drum is greater than 54C when the Start key is pressed.
Causes: Drum overheat Thermistor

Code: E-21

Description: Paper Exit Timing Sensor error The paper exit timing sensor does not activate before the master eject position sensor activates.
Causes: Drum sensors Feeler

Code: E-22

Description: 2nd Feed Timing Sensor error The 2nd feed timing sensor does not activate before the paper exit timing sensor activates.
Causes: Drum sensors Feeler

Code: E-23

Description: Master Eject Position Sensor (Drum HP) error The master eject position sensor does not activate before the feed start timing sensor activates.
Causes: Drum sensors Feeler

Code: E-24

Description: Feed Start Timing Sensor error The feed start timing sensor does not activate before the 2nd feed timing sensor activates.
Causes: Drum sensors Feeler

Code: E-40

Description: Thermal Head ID error The CPU detects an abnormal ID signal from the thermal head.
Causes: Thermal head MPU Thermal head connector disconnected
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie