Description: Charge Roller Current Correction Error Definition [B] The charge roller bias correction is performed twice even if the maximum charge roller bias (–2,000 V) is applied to the roller.
Description: Polygon Mirror Motor Error Definition [B] The polygon mirror motor does not reach its operating speed within 20 seconds after the polygon mirror motor on signal, or the lock signal is still activated for more than 20 seconds after the polygon mirror motor off signal.
Causes: · Polygon mirror motor defective · Poor connection between the polygon mirror motor driver and the BICU board · BICU board defective
Description: No Laser Writing Signal (F-Gate) Error 1 Definition [B] The laser writing signal (F-gate) does not go to LOW for more than 15 seconds after the paper reaches the registration sensor.
Description: 1st Laser Synchronization Error Definition [B] The 1st laser synchronization signal cannot be detected by the main scan synchronization detector board even if the laser diodes are activated.
Causes: · Poor connection between the laser synchronization detector board and the LD unit. · Laser synchronization detector board out of position · Laser synchronization detector board defective · LD unit defective
Nhận ưu đãi sớm nhất khi chương trình diễn ra
Đăng ký nhận bản tin
Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này.
Chính sách cookie
Những cookie này là cần thiết để trang web hoạt động đúng cách.
Những cookie này giúp chúng tôi hiểu cách khách truy cập tương tác với trang web.
Những cookie này được sử dụng để cung cấp quảng cáo cá nhân hóa.