Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Ricoh G038 AP2700 R-P1

Code: 0201

Description: On-board SDRAM read/verify failed.
Causes: Replace the controller if this error is frequent.

Code: 0301

Description: SDRAM DIMM (option) read/verify failed.
Causes: Replace the SDRAM DIMM if this error is frequent.

Code: 1101

Description: Data transmission did not finish within the specified time.
Causes: An incompatible loop-back connector is connected to the parallel port, or the loop-back connector is not connected. Use the correct loop-back connector (P/#: G0219350) before the test.

Code: 1102

Description: Data looped back to the controller is not the same as the data transmitted.
Causes: The loop-back connector may be defective. Try using another one.

Code: 11xx

Description: Parallel interface error.
Causes: Replace the controller if this error is frequent.

Code: 1401

Description: The controller NVRAM has a problem.
Causes: Replace the NVRAM if this error is frequent.

Code: 1402

Description: NVRAM checksum error or the battery has run out.
Causes: Replace the NVRAM if this error is frequent.

Code: 1403

Description: NVRAM write error
Causes: Replace the NVRAM if this error is frequent.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie