Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Ricoh G178 Aficio Pro C900 AG-P1 — Trang 16/85

Code: 398-003

Description: Drum rotation error: M Drum abnormal rotation error The drum rotation pulse for a color changes more than ±20% compared with the standard rotation pulse.
Causes: • Drum cleaning blade turned up (flipped) • Waste toner stuck in the drum cleaning unit • Drum filming • Developer stuck in the development unit • Motor lock due to the overload to the drum motor • Defective drum rotation sensor or harness • Defective drum motor • Defective or dirty drum encoder
Remedy: 1. Check if the drum cleaning blade is bent. 2. Check or replace the drum cleaning unit. 3. Check or replace the development unit. 4. Check the harness connection. 5. Replace the drum rotation sensor 6. Replace the drum motor 7. Replace the drum encoder.

Code: 399-001

Description: Drum rotation error: Y Drum stop error The drum encoder counter for a color does not increase for 20 ms while the drum motor is rotating.
Causes: • Drum cleaning blade turned up (flipped) • Waste toner stuck in the drum cleaning unit • Drum filming • Developer stuck in the development unit • Motor lock due to the overload to the drum motor • Defective drum rotation sensor or harness • Defective drum motor • Defective or dirty drum encoder
Remedy: 1. Check if the drum cleaning blade is bent. 2. Check or replace the drum cleaning unit. 3. Check or replace the development unit. 4. Check the harness connection. 5. Replace the drum rotation sensor 6. Replace the drum motor 7. Replace the drum encoder.

Code: 399-002

Description: Drum rotation error: Y Drum rotation speed error The drum rotation time for a color change is more than ±5% compared with a previous rotation time after 4 seconds has elapsed from the drum start.
Causes: • Drum cleaning blade turned up (flipped) • Waste toner stuck in the drum cleaning unit • Drum filming • Developer stuck in the development unit • Motor lock due to the overload to the drum motor • Defective drum rotation sensor or harness • Defective drum motor • Defective or dirty drum encoder
Remedy: 1. Check if the drum cleaning blade is bent. 2. Check or replace the drum cleaning unit. 3. Check or replace the development unit. 4. Check the harness connection. 5. Replace the drum rotation sensor 6. Replace the drum motor 7. Replace the drum encoder.

Code: 399-003

Description: Drum rotation error: Y Drum abnormal rotation error The drum rotation pulse for a color changes more than ±20% compared with the standard rotation pulse.
Causes: • Drum cleaning blade turned up (flipped) • Waste toner stuck in the drum cleaning unit • Drum filming • Developer stuck in the development unit • Motor lock due to the overload to the drum motor • Defective drum rotation sensor or harness • Defective drum motor • Defective or dirty drum encoder
Remedy: 1. Check if the drum cleaning blade is bent. 2. Check or replace the drum cleaning unit. 3. Check or replace the development unit. 4. Check the harness connection. 5. Replace the drum rotation sensor 6. Replace the drum motor 7. Replace the drum encoder.

Code: 400

Description: ID sensor error: Calibration Before adjustment Vsg_reg<0.5, but Vsg_reg could not be adjusted to the target Vsg_reg = 4.0 ±0.5V during process control.
Causes: • ID sensor harness disconnected, loose, defective • ID sensor dirty • ID sensor defective • ID/ MUSIC sensor shutter defective • ITB dirty
Remedy: 1. Check the harness connection. 2. Clean or replace the ID/ MUSIC sensors. 3. Replace the ITB cleaning unit.

Code: 410

Description: ID sensor error: Development K. D evelopment gamma for black, magenta, cyan, or yellow is not within range (0.3 to 6.0). Process control halts when this SC is issued.
Causes: • ID/ MUSIC sensor shutter defective • LD sensor harness loose, broken, defective • LD unit not firing • CGB HVPS harness loose, broken, defective • CGB HVPS defective • Developer worn
Remedy: 1. Replace the ID/ MUSIC sensors. 2. Check the harness connection to the LD unit. 3. Replace the LD unit. 4. Check the harness connection to the CGB HVPS. 5. Replace the CGB HVPS. 6. Replace the developer.

Code: 411

Description: ID sensor error: Development C. Development gamma for black, magenta, cyan, or yellow is not within range (0.3 to 6.0). Process control halts when this SC is issued.
Causes: • ID/ MUSIC sensor shutter defective • LD sensor harness loose, broken, defective • LD unit not firing • CGB HVPS harness loose, broken, defective • CGB HVPS defective • Developer worn
Remedy: 1. Replace the ID/ MUSIC sensors. 2. Check the harness connection to the LD unit. 3. Replace the LD unit. 4. Check the harness connection to the CGB HVPS. 5. Replace the CGB HVPS. 6. Replace the developer.

Code: 412

Description: ID sensor error: Development M. Development gamma for black, magenta, cyan, or yellow is not within range (0.3 to 6.0). Process control halts when this SC is issued.
Causes: • ID/ MUSIC sensor shutter defective • LD sensor harness loose, broken, defective • LD unit not firing • CGB HVPS harness loose, broken, defective • CGB HVPS defective • Developer worn
Remedy: 1. Replace the ID/ MUSIC sensors. 2. Check the harness connection to the LD unit. 3. Replace the LD unit. 4. Check the harness connection to the CGB HVPS. 5. Replace the CGB HVPS. 6. Replace the developer.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie