Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Ricoh G178 Aficio Pro C900 AG-P1 — Trang 24/85

Code: 460

Description: Separation HV output error An interrupt checks the status of the HVPS every 10 ms. This SC is issued if the BCU detects a short in the HVPS 20 times at PWM D(ac).
Causes: • Damaged insulation on the PTR HVPS cable • Damaged insulation around the PTR HVPS
Remedy: 1. Replace the PTR HVPS cable. 2. Replace the PTR HVPS. 3. Replace the RCB.

Code: 465

Description: ITB cleaning unit set error The machine detects a setting error for the ITB cleaning unit while both front doors are closed.
Causes: • Incorrect installation of the ITB cleaning unit
Remedy: Check and reinstall the ITB cleaning unit.

Code: 469

Description: ITB cleaning motor lock error The machine detects an error of the ITB cleaning motor while it is rotating.
Causes: • Harness to the ITB cleaning motor disconnected • Overload to the ITB cleaning motor • ITB cleaning motor defective
Remedy: 1. Check the harness connection to the ITB cleaning motor. 2. Remove the obstacle that affects the ITB cleaning motor. 3. Replace the ITB cleaning motor.

Code: 470

Description: ITB rotation error The machine detects an error of the ITB rotation while it is rotating.
Causes: • Overload to the ITB drive motor (ITB cleaning blade rolled in) or motor defective • Defective belt speed sensor
Remedy: 1. Check or replace the ITB drive motor. 2. Check the harness connection, or replace the belt speed sensor.

Code: 471

Description: ITB skew adjustment error: time out The machine cannot complete the ITB centering control for 120 seconds after the ITB motor has started rotating.
Causes: • Belt centering roller out of home position • ITB motor rotation sensor defective • Belt centering roller sensor defective • Belt centering roller motor defective
Remedy: 1. Execute "Clearing SC471/475/476". 2. Replace the ITB motor rotation sensor. 3. Replace the belt centering roller sensor. 4. Replace the belt centering roller motor.

Code: 472

Description: Belt centering roller HP error • The belt centering roller sensor does not detect the belt centering roller at HP during initialization. • The belt centering roller sensor still detects the belt centering roller at HP after the belt centering roller motor has started rotating.
Causes: • Belt centering roller sensor detective • Belt centering roller motor defective
Remedy: 1. Replace the belt centering roller sensor. 2. Replace the belt centering roller motor.

Code: 473

Description: ITB skew error The machine detects the ITB skew error.
Causes: • ITB abnormal • Belt centering roller out of home position • ITB motor rotation sensor defective • Belt centering roller sensor defective • Belt centering roller motor defective
Remedy: 1. Reinstall the ITB in the opposite direction or replace it. 2. Execute "Clearing SC471/475/476". 3. Replace the ITB motor rotation sensor defective. 4. Replace the belt centering roller sensor. 5. Replace the belt centering roller motor.

Code: 474

Description: ITB position error 1 The belt centering sensor detects an ITB position error.
Causes: • ITB abnormal • Belt centering roller out of home position • ITB motor rotation sensor defective • Belt centering roller sensor defective • Belt centering roller motor defective
Remedy: 1. Reinstall the ITB in the opposite direction or replace it. 2. Execute "Clearing SC471/475/476" 3. Replace the ITB motor rotation sensor defective. 4. Replace the belt centering roller sensor. 5. Replace the belt centering roller motor.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie