Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Ricoh G178 Aficio Pro C900 AG-P1 — Trang 73/85

Code: 797-25

Description: Glue Level Thermistor (S58) Adjustment Error PB (D391)
Causes: One of the following errors occurred in the adjustment data for the glue level thermistor: 1. Glue level thermistor 1 value (low limit) was out of the range: 128°C±14C 2. Glue level thermistor 2 value (high limit) was out of the range: 142°C±10C 3. Glue level thermistor adjustment value 1 was larger than for adjustment 1.
Remedy: • Replace the EEPROM on the slave control board

Code: 797-26

Description: Timing Sensor (S5) Adjustment Error PB (D391) The value for the adjustment of the timing sensor was out of range (3.0V to 3.5V)
Causes: • Timing sensor (S5) defective • D/A converter defective • A/D converter defective
Remedy:

Code: 797-27

Description: Cover Registration Sensor (S21) Error PB (D391) The value for the adjustment of the cover registration sensor was out of range (3.0V to 3.5V)
Causes: • Cover registration (S21) sensor defective • D/A converter defective • A/D converter defective
Remedy:

Code: 797-28

Description: Cover Horizontal Registration Sensor: Small (S71) PB (D391) The value for the adjustment of the cover horizontal registration sensor: small was out of range (3.0V to 3.5V)
Causes: • Cover horizontal registration sensor: small (S71) defective • D/A converter defective • A/D converter defective
Remedy:

Code: 797-29

Description: Cover Horizontal Registration Sensor: Large (S72) PB (D391) The value for the adjustment of the cover horizontal registration sensor: large was out of range (3.0V to 3.5V)
Causes: • Cover horizontal registration sensor: large (S72) defective • D/A converter defective • A/D converter defective
Remedy:

Code: 797-3

Description: Trimmings Buffer HP Sensor: Left (S103) Error PB (D391) The trimmings buffer sensor: left (S103) did not go OFF within the prescribed time because it failed to leave the HP sensor. -or- The trimmings buffer sensor: left (S103) did not go ON within the prescribed time because it failed to arrive at the HP sensor.
Causes: • Trimmed scraps in or around the trimmings buffer • Trimmings buffer motor (M37) defective • Left trimmings buffer sensor (S103) defective • Sensor or motor harness loose, broken, defective
Remedy:

Code: 797-30

Description: Book Exit Sensor (S64) Error PB (D391) The value for the adjustment of the book exit sensor (S64) was out of range (3.2V to 3.54V)
Causes: • Signature Exit Sensor (S64) defective • D/A converter defective • A/D converter defective
Remedy:

Code: 797-31

Description: Leading Edge Sensor (S65) Error PB (D391) The value for the adjustment of the LE sensor (S65) was out of range (3.2V to 3.54V)
Causes: • Leading edge sensor (S65) defective • D/A converter defective • A/D converter defective
Remedy:
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie