Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Ricoh G179 SP8200DN AL-P1 — Trang 12/14

Code: 864

Description: HDD data CRC error
During HDD operation, the HDD cannot respond to a CRC error query. Data transfer does not execute normally while data is being written to the HDD.
Causes: • HDD defective

Code: 865

Description: HDD access error
HDD responded to an error during operation for a condition other than those for SC863, 864.
Causes: • HDD defective

Code: 866

Description: SD card error 1: Confirmation
The machine detects an electronic license error in the application on the SD card in the controller slot immediately after the machine is turned on. The program on the SD card contains electronic confirmation license data. If the program does not contain this license data, or if the result of the check shows that the license data in the program on the SD card is incorrect, then the checked program cannot execute and this SC code is displayed.
Causes: • Program missing from the SD card • Download the correct program for the machine to the SD card

Code: 867

Description: SD card error 2: SD card removed
The SD card in the slot is removed while the machine is on.
Causes: Insert the SD card, then turn the machine off and on.

Code: 868

Description: SD card error 3: SC card access
An error occurs while an SD card is used.
Causes: SD card not inserted correctly • SD card defective • Controller board defective Note: If you want to try to reformat the SC card, use SD Formatter Ver 1.1.

Code: 870

Description: Address book data error
The address book data cannot be read from the HDD, SD card or flash ROM on the controller where it is stored, or the data read from the media is defective.
Causes: • Software defective: Turn the machine off/on. If this is not the solution for the problem, then replace the controller firmware. • HDD defective.

Code: 872

Description: HDD mail receive data error
• The machine detects that the HDD is not operating correctly at power on. • The machine detects that the HDD is not operating correctly (can neither read nor write) while processing incoming email.
Causes: • HDD defective • The machine is turned off while the HDD is being accessed. Do SP5832-001 to format the all data on the HDD.

Code: 873

Description: HDD mail send data error
An error is detected on the HDD immediately after the machine has been turned on, or power has been turned off while the machine has used the HDD.
Causes: 1. Do SP5832-001 (HDD – Formatting (All)) to initialize the HDD. 2. Replace the HDD
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie