Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Ricoh M053 SP5210SF

Code: 101

Description: Exposure lamp error 1 The standard white level setting dropped below the specified range during scanning.
Causes: • White plate dirty • Spurious electrical noise on power supply line • Exposure lamp connection loose, broken, defective • Exposure lamp defective • Lamp stabilizer connection, loose, broken, defective • Lamp stabilizer defective • High voltage power supply harness loose, broken, defective • SBU defective • BCU defective • SIO defective
Remedy:

Code: 120

Description: Scanner home position error 1 The scanner HP sensor did not turn off during scanner initialization or copying.
Causes: • Scanner motor harness loose, broken, defective at scanner motor or at BCU • Scanner HP sensor harness, loose, broken, defective at HP sensor or at BICU • Scanner motor or motor driver board defective • Scanner motor drive board defective • Scanner HP sensor defective
Remedy:

Code: 121

Description: Scanner home position error 2 The scanner HP sensor did not turn on during scanner initialization or copying.
Causes: • Scanner motor harness loose, broken, defective at scanner motor or at BCU • Scanner HP sensor harness, loose, broken, defective at HP sensor or at BICU • Scanner motor or motor driver board defective • Scanner motor drive board defective • Scanner HP sensor defective
Remedy:

Code: 141

Description: Black level correction error Black level correction could not be set properly during automatic adjustment.
Causes: • Harnesses at the SBU or BICU loose, broken, defective. • SBU defective
Remedy:

Code: 142

Description: White level correction error White level correction could not be set properly during automatic adjustment.
Causes: • Harnesses at SBU or BICU loose, broken, defective • Anti-condensation heater (option) in scanner unit not operating • Exposure lamp harness, loose, broken, defective • Exposure lamp defective • Scanner drive error • SBU defective
Remedy:

Code: 143

Description: SBU auto adjust error The machine could not acquire the white or black peak level setting at power on.
Causes: • Harnesses at SBU or BICU loose, broken, defective • Anti-condensation heater (option) in scanner unit not operating • Exposure lamp harness, loose, broken, defective • Exposure lamp defective • Scanner drive error • SBU defective
Remedy:

Code: 144

Description: SBU connection error Connection to the SBU could not be confirmed, possibly due to a defect in the BICU detection port.
Causes: • Harness connection at BICU or SBU loose, broken, defective • BICU defective • SBU defective
Remedy:

Code: 161-001

Description: IPU Error 1 The self-diagnostic test detected an error at the BICU at power on, or after the machine returned from energy save mode.
Causes: • Harness between SBU and BICU loose or broken • BICU defective • SBU defective
Remedy:
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie