• Code: 796-1
• Description: Glue Vat HP Sensor (S73) Error PB (D391) The glue vat HP sensor at the rear of the bookbinder failed to go ON within the prescribed time. -or- The glue vat HP sensor at the rear of the bookbinder failed to go OFF.
• Causes: • Glue vat motor (M32) defective • Glue vat HP sensor (S73) defective • Sensor connector loose, broken, defective
• Remedy:

• Code: 796-10
• Description: Spine Plate Open Sensor (S62) Error PB (D391) The spine plate open sensor did not go ON within the prescribed time after the spine plate motor turned on to open the plate. -or- The spine plate open sensor did not go OFF within the prescribed time after the spine plate motor turned on to close the plate.
• Causes: • Spine plate motor (M26) defective • Spine plate open sensor (S62) defective • Sensor or motor connector loose, broken, defective
• Remedy:

• Code: 796-11
• Description: Spine Plate Closed Sensor (S63) PB (D391) The spine plate close sensor did not go ON within the prescribed time after the spine plate motor turned on to close the plate. -or- The spine plate close sensor did not go OFF within the prescribed time after the spine plate motor turned on to open the plate.
• Causes: • Spine plate motor (M26) defective • Spine plate closed sensor (S63) defective • Motor or sensor connector loose, broken, defective
• Remedy:

• Code: 796-12
• Description: Front Door Lock Error PB (D391) The right front door sensor did not go OFF even though the front doors closed and locked. -or- The right front door sensor did not go ON even though the front doors released and opened.
• Causes: • The right front door solenoid (SOL3) defective • Right front door sensor (S30) defective • One or more of the front door switches (MSW1, 2, 4, 5, 6, 7) is defective • Solenoid, sensor, or MSW connector loose, broken, defective
• Remedy:

• Code: 796-13
• Description: Switchback Flapper HP Sensor (S10) Error PB (D391) The switchback flapper HP sensor in the stacking tray did not go ON after the motor turned on long enough to raise the flapper through an arc of 50 degrees. -or- The switchback flapper HP sensor did not go OFF after the motor remained on long enough to lower the flapper through an arc of 150 degrees.
• Causes: • Switchback flapper HP sensor (S10) defective • Switchback flapper motor (M8) defective • Sensor or motor connector loose, broken, defective
• Remedy:

• Code: 796-14
• Description: TE Press Lever HP Sensor (S3) Error PB (D391) The TE press lever HP sensor in the stacking tray did not go ON the TE press lever motor remained on long enough to move the lever through and arc of 30 degrees to release the lever. -or- The TE press lever HP sensor did not go OFF when the TE press lever motor remained on long enough to move the lever through and arc of 20 degrees to close the lever.
• Causes: • TE press lever HP sensor (S3) defective • TE press lever motor (M3) defective • Sensor or motor connector loose, broken, defective
• Remedy:

• Code: 796-15
• Description: Jog Fence HP Sensor: Front/Small (S12) Error PB (D391) The front jog fence HP sensor in the stacking tray for small size paper did not go ON within the prescribed time after the front jogger motor turned on long enough to move the fence front jog fence. -or- The front jog fence HP sensor for small size paper did not go OFF within the prescribed time after the front jogger motor turned on to move the front fence.
• Causes: • Jog fence HP sensor: front/small (S12) defective • Jogger motor: front (M4) defective • Sensor or motor connector loose, broken, defective
• Remedy:

• Code: 796-16
• Description: Jog Fence HP Sensor: Front/Large (S14) Error PB (D391) The front jog fence HP sensor for large size paper in the stacking tray did not go ON within the prescribed time after the front jogger motor turned on to move the front fence. -or- The front jog fence HP sensor for large size paper in the stacking tray did not go OFF within the prescribed time after the front jogger motor turned on to move the front fence.
• Causes: • Jog fence HP sensor: front/large (S14) defective • Jogger motor: front (M4) defective • Sensor or motor connector loose, broken, defective
• Remedy: