Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Ricoh M159 SP4520DN Gim-P1dM — Trang 33/35

Code: SC878-01

Description: USB Flash error
Causes: USB Flash file system error USB Flash file system has been destroyed.
Remedy: Replace the controller board.

Code: SC878-02

Description: TPM error
Causes: An error occurred in the TPM or TPM driver. TPM is defective
Remedy: Replace the controller board.

Code: SC878-03

Description: TCSD error
Causes: An error occurred in TPM software stack. • Unable to start TPM • Necessary files missing from the TPM.
Remedy: Replace the controller board.

Code: SC880-00

Description: MLB error
Causes: The response is not received within the specified time during the access to the MLB. Defective MLB
Remedy: • Replace the MLB • Remove the MLB

Code: SC881-01

Description: Management area error
Causes: Defective software has been detected. Abnormal accumulation of authentication information in the software
Remedy: Turn the main power switch off and on.

Code: SC899-00

Description: Software performance error (signal reception end)
Causes: Occurs when an internal program behaves abnormally.
Remedy: In the case of a hardware defect • Replace the hardware. In the case of a software error • Turn the main power off/on. • Try updating the firmware.

Code: SC900-00

Description: Electronic counter error
Causes: The value provided by the electronic total counter is outside the normal range. • Unexpected NVRAM installed • Defective NVRAM • NVRAM data corruption • Data is stored in an unexpected area due to external causes. • The count requests made by SRM upon receiving the PRT have not yet been processed.
Remedy: Install an NVRAM device designed specifically for the model.

Code: SC920

Description: Printer application error
Causes: A serious application error that stops the machine from operating is detected. • 920-00 At PM startup, no response was returned within the specified period of time. • 920-01 A time-out occurred during PM operation. • 920-02 WORK memory acquisition failed. • 920-03 The filter process cannot be started. • 920-04 The filter process was aborted.
Remedy: Turn the main power switch off and on.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie