Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Ricoh M160 SP4510SF Gim-MF1d — Trang 16/35

Code: SC842-02

Description: NAND-Flash Block-deletion Excess-error
Causes: When starting-up the machine or re-starting it from the energy saving, the machine reads the state of the NAND-Flash and detects that there are block-deletions whose amount exceeds the threshold. This means that the life of the NAND-Flash is near-end. Near-end Life of NAND-Flash
Remedy: Replace the controller board as soon as possible.

Code: SC853-00

Description: Bluetooth device connection error
Causes: When a Bluetooth hardware device (USB type) is connected after startup. A Bluetooth hardware device (USB type) has been connected after startup.
Remedy: Connect the Bluetooth hardware device (USB type) before turning on the main power switch.

Code: SC854-00

Description: Bluetooth device removal error
Causes: When a Bluetooth hardware device (USB type) is removed after startup. A Bluetooth hardware device (USB type) has been removed after startup.
Remedy: Connect the Bluetooth hardware device (USB type) before turning on the main power switch.

Code: SC855-01

Description: Wireless LAN board error (driver attachment failure)
Causes: Wireless LAN board error (wireless LAN card: 802.11 is covered) • Defective wireless LAN board • Loose connection
Remedy: • Turn the main power off/on. • Replace wireless LAN board

Code: SC855-02

Description: Wireless LAN board error (driver initialization failure)
Causes: Wireless LAN board error (wireless LAN card: 802.11 is covered) • Defective wireless LAN board • Loose connection
Remedy: • Turn the main power off/on. • Replace wireless LAN board

Code: SC857-00

Description: USB driver error
Causes: USB I/F is not available due to USB driver error.
Remedy: • Make sure that the USB is connected correctly. • Replace the controller board.

Code: SC858-00

Description: Data encryption conversion error (Key error)
Causes: A serious error occurred during an attempt to update the encryption key. • Data in the USB Flash etc. is corrupted • Communication error because of electromagnetic interference etc. • Controller board is defective
Remedy: Replace the Controller Board.

Code: SC858-01

Description: Data encryption conversion error (HDD Key Setting Error)
Causes: A serious error occurred during an attempt to update the encryption key. • Data in the USB Flash etc. is corrupted • Communication error because of electromagnetic interference etc. • Controller board is defective
Remedy: Replace the Controller Board.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie