Causes: When starting-up the machine or re-starting it from the energy saving, the machine reads the state of the NAND-Flash and detects that there are block-deletions whose amount exceeds the threshold. This means that the life of the NAND-Flash is near-end. Near-end Life of NAND-Flash
Remedy: Replace the controller board as soon as possible.
Causes: When a Bluetooth hardware device (USB type) is connected after startup. A Bluetooth hardware device (USB type) has been connected after startup.
Remedy: Connect the Bluetooth hardware device (USB type) before turning on the main power switch.
Description: Data encryption conversion error (Key error)
Causes: A serious error occurred during an attempt to update the encryption key. • Data in the USB Flash etc. is corrupted • Communication error because of electromagnetic interference etc. • Controller board is defective
Description: Data encryption conversion error (HDD Key Setting Error)
Causes: A serious error occurred during an attempt to update the encryption key. • Data in the USB Flash etc. is corrupted • Communication error because of electromagnetic interference etc. • Controller board is defective
Remedy: Replace the Controller Board.
Nhận ưu đãi sớm nhất khi chương trình diễn ra
Đăng ký nhận bản tin
Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này.
Chính sách cookie
Những cookie này là cần thiết để trang web hoạt động đúng cách.
Những cookie này giúp chúng tôi hiểu cách khách truy cập tương tác với trang web.
Những cookie này được sử dụng để cung cấp quảng cáo cá nhân hóa.