Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Riso CR series — Trang 4/5

Code: E02

Description: Elevator Motor Lock
• When the light path of the Upper limit sensor or the Lower limit sensor is not cut within 10 seconds after the Elevator motor is activated. • If the light path of both the Upper limit and Lower limit sensors are blocked when the Elevator motor is activated. • If excessive current is detected 0.3 seconds consecutively after the Elevator motor is activated.

Code: E03

Description: Clamp Motor Lock [During Clamp Motor Initial Positioning]
• If the light path of the Clamp senors both A and B are not opened within 13 seconds after after the Clamp motor is activated. [During Master Release from the Clamp Plate] • If the light path of the Clamp sensor B is not blocked within 3 seconds after the Clamp motor is activated. • If the light path of the Clamp sensor B is not opened within 12 seconds after the Clamp motor is activated. [When the Clamp Plate opens during Master Clamping] • If the light path of the Clamp sensor B is not blocked within 3 seconds after the Clamp motor is activated. • If the light path of the Clamp sensor A is not opened within 5 seconds after the Clamp motor is activated. [When the Clamp Plate closes during Master Clamping] • If the light path of the Clamp sensor B is not opened within 5 seconds after the Clamp motor is activated.

Code: E04

Description: Ink Overflow
• If the Overflow sensor detects excessive ink in the Squeegee unit.

Code: E05

Description: Print Positioning Motor Lock
• If the Vertical centering sensor status has not been changed from ON to OFF (or OFF to ON) within 3550 ms after the Print positioning motor activated.

Code: E06

Description: Position-A Sensor Malfunction
• If Position-A sensor cannot be detected (or keeps detecting) even though the Main motor encoder sensor signal is making the output after the Main motor is activated.

Code: E07

Description: Master Compressing Motor Lock
[When compressing] • If the light path of the Master compressing sensor is not opened within 10 seconds after the Master compressing motor is activated. [When returning back] • If the light path of the Master compressing sensor is not opened (or closed) within 1 second after the Master compressing motor is activated.

Code: E08

Description: Communication Error between TR and Interface Accessaries
• If a communication error has occurred between the CPU and the interface accessaries.

Code: E10

Description: Shading Error
• If the Shading compensation is not made.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie