Danh mục sản phẩm

Code :

Code: E13
Description: Cutter Motor Lock
• If the Cutter position switch is not turned OFF within 75 ms after the Cutter motor is activated. • If the Cutter position switch is not pressed within 450 ms after the Cutter motor is activated.

Code: E14
Description: Master Removal Motor Lock
• If excessive current is detected 0.3 seconds consecutively after the Master removal motor is activated.

Code: E15
Description: Master Tension Plate Lock
• If the light path of the Master tension plate sensor is not blocked within 384 pulse rotation of the Read pulse motor rotated in the reverse direction. • If master loading error is detected at Drum angle 79° and if the Master tension plate sensor is blocked.

Code: E16
Description: Inking Motor Lock
• If excessive current is detected 0.3 seconds consecutively after the Inking motor is activated.

Code: E20
Description: Paper Ejection Motor Lock
• If excessive current is detected 0.3 seconds consecutively after the Paper ejection motor is activated.

Code: E50
Description: Connect "Copy/Master" Counter
• If the connector of the Counter is not connected.

Code: E78
Description: Machine Model Selection Error
• If Memory switch No.200 is selected to 9~F.

‹ First < 2 3 4 5

0