Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Riso CR1630 — Trang 5/5

Code: E13

Description: Cutter Motor Lock
• If the Cutter position switch is not turned OFF within 75 ms after the Cutter motor is activated. • If the Cutter position switch is not pressed within 450 ms after the Cutter motor is activated.

Code: E14

Description: Master Removal Motor Lock
• If excessive current is detected 0.3 seconds consecutively after the Master removal motor is activated.

Code: E15

Description: Master Tension Plate Lock
• If the light path of the Master tension plate sensor is not blocked within 384 pulse rotation of the Read pulse motor rotated in the reverse direction. • If master loading error is detected at Drum angle 79° and if the Master tension plate sensor is blocked.

Code: E16

Description: Inking Motor Lock
• If excessive current is detected 0.3 seconds consecutively after the Inking motor is activated.

Code: E20

Description: Paper Ejection Motor Lock
• If excessive current is detected 0.3 seconds consecutively after the Paper ejection motor is activated.

Code: E50

Description: Connect "Copy/Master" Counter
• If the connector of the Counter is not connected.

Code: E78

Description: Machine Model Selection Error
• If Memory switch No.200 is selected to 9~F.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie