Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Riso FR Series

Code: T1

Description: Main Motor Lock
• In 3 seconds from turning ON of the Main motor, the A detection sensor light path is still held blocked.
• In 8 seconds from turning ON of the Main motor, the A detection sensor is not blocked.

Code: T10

Description: Malfunction Image Processing PCB
• When the scanning contrast adjustment signal is not output from the image processing PCB.

Code: T11

Description: Pressure Control Motor Lock
• In 100ms from turning ON of the Pressure control motor, the Encoder sensor cannot detect a pulse.
• In 5 seconds from turning ON of the Pressure control motor, the Pressure centering sensor is not turned ON/OFF.

Code: T12

Description: • Malfunction of Trimming PCB
• When the TOP signal is not output from the Trimming PCB 2

Code: T13

Description: Cutter Motor Lock
• After master cutting retrial with the drum held in C-2 position, when the Master positioning sensor is in light-receiving state. (Master cutting has failed in the 2nd time.)

Code: T14

Description: Clamp Error (2)
• If the actuator of the Clamp safety switch is not depressed when the Clamp solenoid is not in operation.

Code: T15

Description: Flat Bed Read Pulse Motor Lock
• If the Image scanner home position sensor does not detect the Image scanner within 18898 pulses after the Flat bed read pulse motor is activated.
• If the Image scanner ADF Shading sensor does not detect the Image scanner within 15748 pulses after the Flat bed read pulse motor is activated. • If the scanner home position sensor does not detect the Image scanner within 14,551 pulses(462 mm worth) after the Flat bed read pulse motor is activated during prescanning.
• If the Image scanner is not release from the Image scanner home position sensor within 314 pulses after the Flat bed read pulse motor is activated.
• If the Image scanner is not released from the Image scanner ADF Shading sensor within 314 pulses after the Flat bed read pulse motor is activated.

Code: T16

Description: Position C Sensor Malfunction
• If the Position C sensor status has not been changed from ON to OFF (or OFF to ON) within 8 seconds from the start of the Main Motor.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie