• Code: E 09
• Description: Communication error between RA and the Sorters
  Displayed to interrupt the machine operation:
  1) If a communication error has occurred between the CPU and the sorters.

• Code: E 10
• Description: Malfunction of Trimming PCB
  Displayed to interrupt the machine operation:
  1) If data signals such as original size, are not output from the Trimming PCB at the start of the image scanning operation.

• Code: E 11
• Description: Pressure Control Motor Lock
  Displayed to interrupt the machine operation:
  1) If the pulse from the Encoder disc on the Pressure control motor has not been detected within 100ms from the start of the Pressure control motor.
  2) If the Pressure centering sensor status has not been changed from ON to OFF (or OFF to ON) within 5 seconds from the start of the Pressure control motor.

• Code: E 12
• Description: Machine Model Selection Error
  Displayed to prevent the machine operation: The SW2 (HEX SW) selection on the System PCB is set to "Not Used" position.

• Code: E 13
• Description: Cutter Motor Lock
  Displayed to interrupt the machine operation in master-making and confidential process:
  1) If master is detected by the Master positioning sensor at Drum A position after the cutting operation and besides it is still detected by the Master positioning sensor at the next Drum A position detection after the second cutting operation.

• Code: E 14
• Description: Clamp Error 2
  Displayed to interrupt the machine operation:
  1) If the actuator of the Clamp safety switch is not depressed when the Clamp solenoid is not in operation.

• Code: E 15
• Description: Flat Bed Read Pulse Motor Lock
  Displayed to interrupt the machine operation:
  1) If the Image scanner home position sensor does not detect the Image scanner within 18898 pulses after the Flat bed read pulse motor is activated.
  2) If the Image scanner ADF Shading sensor does not detect the Image scanner within 15748 pulses after the Flat bed read pulse motor is activated.
  3) If the Image scanner is not release from the Image scanner home position sensor within 314 pulses after the Flat bed read pulse motor is activated.
  4) If the Image scanner is not released from the Image scanner ADF Shading sensor within 314 pulses after the Flat bed read pulse motor is activated.

• Code: E 16
• Description: Position C Sensor Malfunction
  Displayed to interrupt the machine operation:
  1) If the Position C sensor status has not been changed from ON to OFF (or OFF to ON) within 8 seconds from the start of the Main Motor.