• Code: E1
• Description: Main Motor Lock
  • If excessive current is detected 0.3 seconds consecutively after the Main motor is activated.
  • If no Encoder sensor output after Main motor is activated.

• Code: E12
• Description: Master removal motor lock
  • Excessive current to the motor is detected three time consecutively during the current check made every 100 ms.

• Code: E13
• Description: Cutter motor Lock
  • If the Cutter home position switch is not turned OFF within 500 ms after the Cutter motor is activated.
  • If the Cutter end position switch is not pressed within 2000 ms after the Cutter motor is activated.

• Code: E16
• Description: Inking Motor Lock
  • If excessive current is detected 2.5 seconds consecutively after the Inking motor is activated.

• Code: E19
• Description: TPH pressure error [During TPH Up Positioning]
  • If the light path of the TPH pressure sensor is not opened within 10 seconds after the Write pulse motor is activated. [During TPH Down Positioning]
  • If the light path of the TPH pressure sensor is not blocked within 10 seconds after the Write pulse motor is activated.

• Code: E3
• Description: Clamp Motor Lock [During Clamp Motor Initial Positioning]
  • If the light path of the Clamp senors both C and L are not opened within 10 seconds after after the Clamp motor is activated. [During Master Release from the Clamp Plate]
  • If the light path of the Clamp sensor L is not blocked within 10 seconds after the Clamp motor is activated.
  • If the light path of the Clamp sensor C is not opened within 10 seconds after the Clamp motor is activated. [When the Clamp Plate opens during Master Clamping]
  • If the light path of the Clamp sensor L is not blocked within 10 seconds after the Clamp motor is activated.
  • If the light path of the Clamp sensor C is not opened within 10 seconds after the Clamp motor is activated. [When the Clamp Plate closes during Master Clamping]
  • If the light path of the Clamp sensor L is not opened within 10 seconds after the Clamp motor is activated.

• Code: E4
• Description: Ink Overflow
  • If the Overflow sensor detects excessive ink in the Squeegee unit.

• Code: E6
• Description: Position-A Sensor Malfunction
  • If Position-A sensor cannot be detected (or keeps detecting) even though the Main motor encoder sensor signal is making the output after the Main motor is activated.