Danh mục sản phẩm

Code :

Code: P01-538
Description: Print drum is not locked during operation. (Print-drum lock position sensor: OFF)

Code: P02-400
Description: Both the upper and lower limit sensors were ON at the same time.

Code: P02-401
Description: Overload current was detected in the elevator motor.

Code: P02-404
Description: The lower-limit sensor does not go OFF within 2 seconds after the elevator motor operates in the raising direction from the lower-limitposition.

Code: P02-405
Description: The upper-limit sensor does not go ON within 12 seconds after the elevator motor operates in the raising direction.

Code: P02-406
Description: The upper-limit sensor does not go OFF within 2 seconds after the elevator motor operates in the lower direction from the upper-limitposition.

Code: P02-407
Description: The lower-limit sensor does not go ON within 12 seconds after the elevator motor operates in the lowering direction.

Code: P02-408
Description: The upper-limit sensor is OFF continuously for over 2 seconds during operation of the elevator servo action to raise the feed tray.

‹ First < 12 13 14 15 16 17 18 > Last ›

0