• Code: H3-568
• Description: Requesting test printing print density information input (Ink-TAG related).

• Code: H4-242
• Description: Requesting master-making density information input (Master-TAG related).

• Code: H5-243
• Description: Requesting Print density information input (Master-TAG related).

• Code: H6-244
• Description: Requesting test printing print density information input (Master-TAG related).

• Code: P01-520
• Description: Main encoder sensor does not go ON/OFF within 10 milliseconds after the main motor activates.

• Code: P01-521
• Description: B-positioning sensor status does not change even after 3,033 pulses after the main motor activates.

• Code: P01-524
• Description: Clamp unit is not at the home position while the print drum is in operation (except during master disposal).

• Code: P01-537
• Description: Print drum failed to stop at position B. (over-run)