Danh mục sản phẩm

Code :

Code: P20-416
Description: Overload current was detected in the paper-ejection motor.

Code: P20-437
Description: Paper-ejection encoder sensor status does not change within 10 milliseconds after the paper-ejection motor is activated.

Code: P24-539
Description: Inking-motor encoder sensor status does not change within 20 milliseconds after the inking-motor is activated.

Code: P25-26
Description: Battery voltage was below 2.3 volts (too low) when the power is turned ON.

Code: P92-570
Description: EEPROM on the print drum PCB was being accessed while the print drum was in releasing action from the machine.

Code: P93-932
Description: No reply from the NET-C network interface card while accessing to the network interface card.

Code: P93-933
Description: No response from NET-C for 90 seconds during NET-C initialization.

Code: P94-225
Description: TPH code does not match with the machine code when the power is turned ON with the master-making unit in operating position or whenthe master-making unit is inserted in operating position while the power is ON.

‹ First < 21 22 23 24 25 26 27 > Last ›

0