Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Riso RZ370 — Trang 16/31

Code: P03-500

Description: Clamp sensor A is OFF after the completion of the clamp unit initialization or home positioning movement.

Code: P03-501

Description: Clamp sensor B does not change within 1 second from the time the clamp motor operates in the correct direction.

Code: P03-502

Description: Clamp sensor B does not change within 1 second from the time the clamp motor operates in the reverse direction.

Code: P03-503

Description: Clamp sensor A does not go ON within 3 seconds when the clamp unit makes initialization movement.

Code: P03-504

Description: At the start of Clamp plate open/close action, the the detection sequence of clamp-sensors A & B is abnormal.

Code: P03-505

Description: At the start of print drum Positon-A compensation movement, the detection sequence of clamp-sensors A & B is abnormal.

Code: P03-506

Description: At the start of Clamp unit Home-positioning movement, the detection sequence of clamp-sensors A & B is abnormal.

Code: P03-507

Description: Clamp sensor A is ON after the clamp release action is completed.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie