Mã lỗi Riso RZ390 — Trang 22/31
Description: ABC (auto-base-control) timeout. The original does not move from the ABC scanning position on the AF unit.
Description: Operation command was made to the AF unit without 24 volts supplied to the AF unit.
Description: Timeout error in receiving reply from the AF unit after command signal was sent from the Riso printer to the AF unit.
Description: Riso printer received an undefined command from the AF unit.
Description: Riso printer detected communication sequence error from the AF unit.
Description: Communication error with AF unit (ACK or NAK error).
Description: Riso printer could not send command to the AF unit within the set time.
Description: AF unit detection signal went OFF while the AF unit is in operation.