Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Riso RZ500 — Trang 24/31

Code: P20-416

Description: Overload current was detected in the paper-ejection motor.

Code: P20-437

Description: Paper-ejection encoder sensor status does not change within 10 milliseconds after the paper-ejection motor is activated.

Code: P24-539

Description: Inking-motor encoder sensor status does not change within 20 milliseconds after the inking-motor is activated.

Code: P25-26

Description: Battery voltage was below 2.3 volts (too low) when the power is turned ON.

Code: P92-570

Description: EEPROM on the print drum PCB was being accessed while the print drum was in releasing action from the machine.

Code: P93-932

Description: No reply from the NET-C network interface card while accessing to the network interface card.

Code: P93-933

Description: No response from NET-C for 90 seconds during NET-C initialization.

Code: P94-225

Description: TPH code does not match with the machine code when the power is turned ON with the master-making unit in operating position or whenthe master-making unit is inserted in operating position while the power is ON.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie