Danh mục sản phẩm

Code :

Code: P12-309
Description: Master-compression-motor encoder sensor count did not change as the master compression motor activated in the compress directionand moved out from the home position.

Code: P12-316
Description: Master-compression-motor encoder sensor count did not change within 10 milliseconds after the master compression motor activated.

Code: P13-203
Description: Cutter HP switch does not go OFF within 100 milliseconds after the cutter motor is activated.

Code: P13-204
Description: Cutter HP switch does not go ON within 300 milliseconds after the cutter motor is activated.

Code: P13-205
Description: Master-positioning sensor is ON when the print drum rotates through the preset angle following master cutting.

Code: P13-221
Description: Both the cutter HP switch and cutter stop position switch are ON at the same time.

Code: P13-222
Description: Cutter HP switch does not go ON within 450 milliseconds after the cutter home positioning operation started.

Code: P13-231
Description: Cutter HP switch does not go OFF within 500 milliseconds after the cutter moved out from the home position.

‹ First < 16 17 18 19 20 21 22 > Last ›

0