Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Riso RZ970 — Trang 19/31

Code: P12-309

Description: Master-compression-motor encoder sensor count did not change as the master compression motor activated in the compress directionand moved out from the home position.

Code: P12-316

Description: Master-compression-motor encoder sensor count did not change within 10 milliseconds after the master compression motor activated.

Code: P13-203

Description: Cutter HP switch does not go OFF within 100 milliseconds after the cutter motor is activated.

Code: P13-204

Description: Cutter HP switch does not go ON within 300 milliseconds after the cutter motor is activated.

Code: P13-205

Description: Master-positioning sensor is ON when the print drum rotates through the preset angle following master cutting.

Code: P13-221

Description: Both the cutter HP switch and cutter stop position switch are ON at the same time.

Code: P13-222

Description: Cutter HP switch does not go ON within 450 milliseconds after the cutter home positioning operation started.

Code: P13-231

Description: Cutter HP switch does not go OFF within 500 milliseconds after the cutter moved out from the home position.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie