Description: Waiting for the master to be removed.
Code: A17-209
Description: Cutter home-position switch is OFF at the start of master-making or master-set operation.
Code: A34-218
Description: Request to resetting the master.
Code: B01-730
Description: Keycard counter: No card
Code: B22-721
Description: With the “Tape separation” function set ON, no power is supplied to the job separator when start key is pressed.
Code: B22-727
Description: After cluster-A signal turned ON, BUSY-signal stayed "L" more than 7 seconds (power to job separator was turned OFF while the tape isbeing ejected.
Code: B23-722
Description: With the “Tape separation” function set ON, no tape detected in the job separator when the start key is pressed.
Code: B23-723
Description: No tape remains in job separator upon completion of the tape-ejection operation.