Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Riso RZ990 — Trang 18/31

Code: P11-600

Description: Print pressure HP sensor does not switch ON within 3.9 seconds after the print pressure pulse motor activated towards higher pressureduring home positioning operation.

Code: P11-601

Description: Print pressure HP sensor does not switch OFF within 4.6 seconds after the print pressure pulse motor activated towards lower pressureduring home positioning operation.

Code: P11-602

Description: Even though the print pressure control pulse motor stopped according to the print pressure HP sensor detection, the stopping positiondoes not correspond with the programmed position. (GA control error).

Code: P12-300

Description: Overload current was detected in the master removal motor.

Code: P12-301

Description: Master compression motor lock when moving compression plate up.

Code: P12-305

Description: Master compression sensor does not go ON within 6.5 seconds after the master compression motor operates in the return direction.

Code: P12-306

Description: Master compression sensor does not go OFF within 2 seconds after the master compression motor operates in the compress direction.

Code: P12-307

Description: Master compression plate maximum position is not detected within 6.5 seconds after the master compression motor operates in thecompress direction.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie