Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Roland RS640 — Trang 2/3

Code: 0102

Description: Even though the machine carries out the regular movement, the output of Limit Sensor does not reach the expected value.
Causes: Limit Sensor does not work correctly or is broken.

Code: 0107

Description: Linear Encoder Setup has not been done.
Causes: Linear Encoder Setup has not been done. Linear Encoder Setup is ended before it is completed.

Code: 0109

Description: Even though the machine carries out the regular movement, the output of the Wiper Sensor does not reach the expected value.
Causes: Wiper Motor error Defect of Wiper Unit Defect of Wiper Sensor Cut-line or short-circuit of cable and Flexible cable

Code: 0110

Description: Input value from Linear Encoder is not changed by the Linear Encoder origin setup. When Motor stops during printing, expected movement is not completed on some head.
Causes: Read error of Linear Encoder. Read error of Encoder on Scan Motor side. Belt is not fixed to Head Carriage firmly.

Code: 0112

Description: Communication error with Cartridge IC driver
Causes: Cartridge IC driver is broken. Cartridge IC driver cable has short circuited or cut-line.

Code: 0114

Description: This error occurs when the machine performs Flushing Position Detection
Causes: Flushing position in the Service menu has not been performed

Code: 0130

Description: There is a problem with Thermistor for Print Heater
Causes: Thermistor cable has short circuited or cutline. Thermistor has a problem.

Code: 0135

Description: Print Heater temperature has reached 60°C and above
Causes: Print Heater cable connection has a problem. Thermostat has a problem. Thermistor has a problem.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie