• Code: 0108
• Description: Wiper Unit Protection Error
  Even though the machine carries out the regular movement, the output of the Wiper Height Sensor does not become to reach the expected value.
• Causes: Disorder of Wiper Height Sensor Fault of Wiper Unit Fault of Wiper Height Sensor Disconnection or short-circuit of Cable and Flexible Cable

• Code: 0109
• Description: Wiper Protection Error
  Even though the machine carries out the regular movement, the output of the Wiper Sensor does not reach the expected value.
• Causes: Disorder of Wiper Sensor Fault of Wiper Unit Fault of Wiper Sensor Cut-line or short-circuit of Cable and Flexible Cable

• Code: 0110
• Description: Linear Encoder Error
  Input value from Linear Encoder is not changed when Linear Encoder is set up the Origin. When Motor stops during printing, Motor does not complete the movement which is supposed to be done.
• Causes: Read error of Linear Encoder Read error of Encoder on Scan Motor side Wire is not fixed to Head Carriage firmly.

• Code: 0111
• Description: Tool / Crop Mark Sensor Adjustment Error
  This error occurs when the machine performs the Auto Crop Mark Detection or the Auto Print / Cut adjustment without the Tool / Crop Mark Sensor Adjustment.
• Causes: Tool / Crop Mark Sensor Adjustment has not been performed.