Danh mục sản phẩm

Code :

Code: 0107
Description: Unset up of the Linear Encoder
Linear Encoder Setup has not been done.
Causes: Linear Encoder Setup has not been done.

Code: 0109
Description: Wiper Protection Error
Even though the machine carries out the regular movement, the output of the Wiper Origin Sensor does not reach the expected value.
Causes: Disorder of Wiper Origin Sensor Fault of Wiper Unit Fault of Wiper Origin Sensor Cut-line or short-circuit of Cable and Flexible Cable

Code: 0110
Description: Linear Encoder Error
Input value from Linear Encoder is not changed when Linear Encoder is set up the Origin. When Motor stops during printing, Motor does not complete the movement which is supposed to be done.
Causes: Read error of Linear Encoder Read error of Encoder on Scan Motor side Wire is not fixed to Head Carriage firmly.

Code: 0111
Description: Tool / Crop Error
This error occurs when the machine performs the Auto Crop Mark Detection or the Auto Print / Cut adjustment without the Tool / Crop Mark Sensor Adjustment.
Causes: Tool / Crop Mark Sensor Adjustment has not been performed.

Code: 0120
Description: Thermistor Error (Print Heater)
Thermistor of the Print Heater doesn't work correctly.
Causes: Thermistor of the Print Heater is broken. There is a cut-line/short in the wiring of the Thermistor.

Code: 0121
Description: Thermistor Error (Dryer)
Thermistor of the Dryer doesn't work correctly
Causes: Thermistor of the Dryer is broken. There is a cut-line/short in the wiring of the Thermistor.

Code: 0125
Description: Heater Error (Print Heater)
Print Heater doesn't work correctly. Temperature of the Print Heater is over 60 degree Celsius.
Causes: There is a cut-line/short in the wiring of the Print Heater. Thermostat is broken. Thermistor is broken.

Code: 0126
Description: Heater Error (Dryer)
Dryer doesn't work correctly. Temperature of the Dryer is over 60 degree Celsius
Causes: There is a cut-line/short in the wiring of the Dryer. Thermostat is broken. Thermistor is broken.

< 1 2

0